Call: 1-800-871-2119   
78
Total:$14,755.00

Search

28 May

Posted at 23:39h by
0 Likes
The Lynx Plus Keypad/Panel  is the newest Honeywell Lynx panel. (not including the Lynx Touch which is a more expensive model that ADT doesnt use) If you have an older model Lynx that needs replacing, this is what you need. It will be compatible with all of your existing Honeywell wireless devices. But it would need to be programmed again and may require a technician's visit.

19 Apr

Posted at 18:53h by
0 Likes
The The ADT Safewatch Wireless Recessed Door Sensor from Honeywell Compatible is a magnetic contact sensor that provides concealed protection for doors. If you want to have a wireless door sensor but don't want it to be surface mounted, you can recess this one into your wooden door jam.  Since it's wireless, it uses a lithium battery that usually lasts 2-5 years depending on frequency of use. So you won't have to worry about constantly changing batteries.

10 Apr

Posted at 01:20h by
0 Likes
The Probe for Flood Sensor is the solution for protecting your home or business from flooding or water leaks. Broken pipes or faulty appliances can cause catastrophic water damage to your home or business if a leak or flood goes unnoticed. This sensor can help you avoid structural damage by detecting a water leak or flooding as soon as it happens. This sensor also triggers an alarm when both pins are in contact with water for more than 3 minutes. This Flood Sensor requires a hardwired connection to a Wireless flood and temperature sensor. Wire recommended and connectors recommended to do this. Must add the wireless flood sensor first. Honeywell recently released the ADT Flood Probe Sensor which includes the proper resistor that is wired in series with a 16 foot cable. The Probe for Flood Sensor does not include the resistor or any wiring.

04 Apr

Posted at 04:11h by
0 Likes
The ADT Wireless Smoke Detector is a detector that's compatible with Safewatch Pro 3000, Quickconnect Panels, and now TS Panels. You may have smoke detectors in your home already, but you can't connect them to ADT's monitoring stations. Did you know that over 80% of fire deaths occur in the home? By adding this detector to your home, help can be notified automatically in the event of a fire.

03 Apr

Posted at 22:55h by
0 Likes
This is the small brick like Back Up Battery Hardwired Security Systems. This belongs in your metal box/control panel that is usually located in a closet or in basements. It is meant to be a 24 hour back up battery, but it can vary for each system since some systems use more power than others. It should be replaced every 3-5 years to make sure that it continues to work properly and that you do not get annoying low battery messages on the screen and calls from the monitoring station. Be sure to check for corrosion as well.

19 Mar

Posted at 03:49h by
0 Likes
This Wireless ADT Motion Detector is pet immune up to 80lbs. This motion needs to be programmed and can only be added if your panel has room for another wireless zone) It is compatible with all Honeywell Wireless compatible panels. These include Quick connect, Lynx Plus, Lynx Touch, Safewatch, and Vista panels.