Shop

DSC NEO Wireless Temperature Sensor

(1 customer review)

$120.00

The DSC NEO Wireless Temperature Sensor is used where temperature detection is critical. Early warning of potentially dangerous temperatures lets you preemptively take action to resolve the situation. So this sensor monitors the temperature of the area you install it in, and it communicates to the control system changes in temperature.

In addition, this sensor is ideal for residential and commercial installations where running wires is either difficult or impossible. It also has a visible signal quality LED indicator that lets you choose the optimal location for installation, eliminating the effort of going back and forth to the keypad.

Description

The DSC NEO Wireless Temperature Sensor is used where temperature detection is critical. Early warning of potentially dangerous temperatures lets you preemptively take action to resolve the situation. So this sensor monitors the temperature of the area you install it in, and it communicates to the control system changes in temperature.

In addition, this sensor is ideal for residential and commercial installations where running wires is either difficult or impossible. It also has a visible signal quality LED indicator that lets you choose the optimal location for installation, eliminating the effort of going back and forth to the keypad.

Additionally, you can use this sensor for both indoor and outdoor temperatures. When it monitors indoor temperature, it uses an internal sensor. When installed to monitor outdoor temperatures or refrigerator installations, it uses an optional waterproof temperature probe. The temperature information communicated from the sensor to the control panel can also be displayed on the system keypad to provide status of indoor and outdoor temperature.

If you use this with the Qolsys Panels you have to choose to either do low temperature (40 degrees Fahrenheit) or high temperature (100 degrees Fahrenheit).

If you wanted to use this with the Qolsys Panel you could also do commercial temperature monitoring and reporting, but then it would not report to the central station as an alarm event like the other two above. This can be used in coolers and refrigerators to make sure the temperature stays in a certain range and alerts you if it goes outside of range.

This sensor is also compatible with DSC Powerseries Neo or DSC Iotega and Qolsys Power G. 

Features:
  • Visible link quality indication shown on the device
  • Programmable temperature warning and alarm thresholds
  • Optional probe to monitor refrigerator, freezer and outdoor temperatures
  • Front and back tamper protected
  • Prolonged battery life (7 years with typical use)
  • Dimensions: 81 x 32 x 25mm (3.19 x 1.25 x 1in)
  • External temperature probe optional add on
Specifications:
  • Dimensions: 92 x 36.5 x 31 mm (3-5/8 x 1-7/16 x 1-1/4 in.)
  • Battery Life: 7 years (typical use)
  • Battery Type: 3 V Lithium battery
  • Weight: 50 g (1.8 oz)
  • Operating Temperature (indoor): -20° to 50°C (-4°F to 122°F)
  • Operating Temperature (outdoor): -30° to 70°C (-22°F to 158°F)

Please check out our YouTube Channel for more information.

Reviews (1)

1 review for DSC NEO Wireless Temperature Sensor

  1. Jacob Menke (store manager)

    This has been handy to have just in case temps drop too low in my second home

Add a review

Your email address will not be published. Required fields are marked *