Call: 1-800-871-2119   
80
Total:$14,735.00

Search

24 Aug

Posted at 02:51h by
0 Likes
Honeywell Wireless Commercial Sensor is a universal contact-monitoring transmitter that can be used with household and commercial fire and burglary-initiating devices such as door/window contacts, motion and glassbreak detectors, sprinkler water flow switches, tamper switches, post indicator valves, manual pull stations and remote duct detectors. Upon activation, it emits an RF signal to a control panel, sending a burglary or fire alarm to a central station.

24 Aug

Posted at 02:34h by
0 Likes
Unfortunately, this product has been Out of Stock and replaced with Vista 128BP. Honeywell Vista 128BPT Commercial Control Panel is a powerful member of the Honeywell family of commercial alarm panels, integrating burglary, CCTV and access control functions. While  many features are available that extend the applications of the Honeywell Vista 128BPT Commercial Control Panel as well as simplifying end-user operation. In addition, The Honeywell Vista 128BPT Commercial Control Panel is listed for residential burglary, residential fire as well as commercial burglary applications (see agency listings in this document for more details). Furthermore, they are also compatible with a wide range of AlarmNet communications products for alarm reporting, uploading /downloading and remote services.

22 Aug

Posted at 04:13h by
0 Likes
Hardwire to Wireless Honeywell 8 Zone Module works to take up to 8 normally closed hardwired contacts and convert them to 8 independent wireless zones. This product is ideal for panel take overs, or where contacts are prewired but not in an ideal location for the control panel. Since its 100% battery operated it can be placed virtually anywhere to simplify the installation. For devices that require power (i.e. motion detector) a separate power supply is required. It can be the existing control panel or a standalone power supply capable of providing the appropriate power.

22 Aug

Posted at 04:04h by
0 Likes
To enroll the sensor, set your panel into program mode, refer to your specific alarm panel manual for details on these menus. There are two triggers on this device and each uses a unique loop number. The tilt sensor assigns to loop 2 and the external input assigns as loop 1. To auto enroll the tilt sensor, you must ensure the tilt is orientated in the up position (refer to picture and note location of arrow on the plastics). When prompted by the panel, move the device until its orientated in the horizontal position. To auto enroll the external contact input, trigger the sensor by closing the circuit between the two terminal inputs when prompted by the panel. This works with a piece of wire, or if using a hardwired contact, by applying the magnet to that contact. This serial number is printed on the device if manual enrollment is desired. The tilt sensor can operate as an “exit / entry” zone or a “perimeter zone”. Set the zone type for the wireless tilt sensor in your panel.

22 Aug

Posted at 03:54h by
0 Likes
Honeywell Compatible Shock Sensor 100% compatibility with Honeywell wireless receivers as well as built-in electro-mechanical sensor with adjustable sensitivity. The shock sensor sensitivity can be adjusted to set how much force is required at impact to trigger the alarm. To increase the sensitivity, turn the white potentiometer clockwise, to decrease the sensitivity adjust it counterclockwise.

22 Aug

Posted at 03:36h by
0 Likes
The Honeywell Compatible Recessed Door Window Sensor is a great discrete sensor that's also 100% compatible with DSC wireless receivers as well as Honeywell devices. Keep in mind that every door and window in a home or office should have alarm contacts installed on it. You should always remember to include openings in the overall count. Depending on a home’s or business size, this may end up being a lot of contacts, but it's important to avoid skipping a single door or window since each serves as a potential entry point for a burglar.

22 Aug

Posted at 03:25h by
0 Likes
Unfortunately, this product is discontinued. For more options, you can check out our available here in our shop. This Honeywell Compatible Bypass Button Door Window Sensor features 100% compatibility with ADT Quickconnect as well as Safewatch Pro 3000. It's also compatible with Honeywell wireless receivers and has proven reliable crystal based wireless technology. It also allows you to push the button to bypass a door so you can leave while the system is armed. Additionally, this sensor has a snap-on interchangeable brown case. So, you can make sure your sensor blends in with any decor.