Product Description:

This ELK Alarm Engine WiFi Adapter is an essential upgrade to enhance connectivity and provide flexible network options for your E27 Alarm Engine. The adapter seamlessly connects to the E27 board via a dedicated Wi-Fi connector, offering a reliable alternative to a hard-wired Ethernet connection. It supports 802.11b/g/n standards to ensure compatibility with a wide range of Wi-Fi networks, operating on the 2.4 GHz frequency to deliver robust performance and extensive coverage suitable for both residential and commercial environments. The inclusion of two antenna options allows users to select the best configuration for their specific needs, ensuring optimal signal strength and reliability. This ELK Alarm Engine WiFi Adapter quickly integrates into your existing setup, eliminating the need for cumbersome wiring. The adapter not only enhances the overall functionality of your E27 Alarm Engine but also offers the convenience and flexibility of wireless connectivity.

But for more Elk products, please visit our page.

Main Features:

• Standard supported: 802.11b/g/n
• Frequency: 2.4 GHz
• Includes 2 antenna options
• Current draw: Approx. 2.1mA
• Size: 3.63″ x 2″ x 1″

Installation Instruction:

*Before installing the Wi-Fi adapter, you MUST turn the E27 master power switch OFF.

1. The AEWF adapter includes two antenna options, a short antenna and a long antenna. The short antenna is ideal for installations with a plastic enclosure and can be mounted on the enclosure. The long antenna works best for installations with a metal enclosure as it allows the antenna to be placed outside the enclosure. Select the antenna that best suits the installation.
2. Route the antenna cable through knockout in the top of the enclosure.
3. Locate the antenna connector on the AEWF adapter (see image to the right). Plug the antenna cable onto the antenna connector. To avoid damage, care should be taken to limit excessive removal and reconnection of the antenna cable.
4. Locate the WIFI connector on the right side of the E27 board.
5. Orient the AEWF adapter with the screen-printed Wi-Fi symbol facing outward (see illustration to the right).
6. Align the AEWF adapter with the connector. Carefully insert the connector pins on the AEWF adapter into the connector on the E27 board. Ensure the AEWF adapter is fully seated.
7. Mount the antenna. The small antenna has an 8” cable and self-adhesive strip at the top for mounting to the plastic enclosure. The large antenna has an 18” cable and a strong adhesive on the back side suitable for mounting to a clean, smooth surface.

Please check out our YouTube Channel for more information.