The Elk Single Door Access Control Module is needed if you want to add access control on Elk Control Panel Systems. It easily connects to the 4-wire keypad data bus which replaces the traditional M1 Keypad or it can be added in addition.

The Elk Single Door Access Control Module is an effective and inexpensive access solution to emergency devices at home. It is ideally compatible with most door lock devices regardless of the voltage rating and style because of the Heavy Duty Form “C” Relay Contacts for Switching Door Strike Power.

Main Features:

• Input for a 26-bit Wiegand Reader, such as UltraProx Wiegand Reader
• Heavy Duty Form “C” Relay Contacts for Switching Door Strike Power
• Low Current (50mA) Switched Negative (pull to ground) Output for “Door Held Open” Alarm
• Low Current (10mA) Switched Negative (pull to ground) Output for “System Ready To Arm” indication
• Low Current (10mA) Switched Negative (pull to ground) Output for “System Armed” indication
• Supervised Input for RTE (Request To Exit) Button/Device
• Supervised Input for Door Status Sensor
• Installs in place of an M1 Keypad and operates from the RS-485 4-Wire Keypad Data Bus
• Four selectable Time settings for “Request to Exit” and “Door Held Open”
• Hardware Watchdog Circuit

Specifications:

• Connections: Unpluggable Screw Terminals, 16 Position
• Operating Voltage: 13.8 VDC
• Current Draw: Less than 30 mA with min. activity, 44 mA fully active
• Housing Dimensions: 4.25″ x 6.375″ x 2.125″
• Circuit Board Dimensions: 3.95″ x 2.875″ x .95″
• Maximum number of access modules and keypads per system: 16

Please check out our YouTube Channel for more information.