The 2GIG Smoke Ring is the ideal solution to make homes even more safe & secure. This ring works in conjunction with traditional AC powered interconnected smoke detectors to communicate alerts to 2GIG (or other 345 MHz) alarm systems. So in the event of a fire, your alarm panel will be notified.
Traditional interconnected smoke detectors send audible alerts throughout the home if any one of the units detects smoke, but they don't communicate the event to an alarm panel. But with this ring, you can add a new layer of protection to your existing interconnected AC-powered smoke detection system. It provides a professionally-monitored alert signal transmission when smoke is detected by any or all of the interconnected, AC-powered smoke detectors.
The Interlogix Heat Detector, aka Rate-of-Rise and Fixed Temperature Heat Detector offers an effective fire safety solution for environments with high likelihood of rapid fire development, or where optical smoke detectors cannot be used due to high dust conditions.
This part has been discontinued and replaced with a newer smaller version.
The Interlogix Wireless Carbon Monoxide Detector alarm monitors the levels of CO gas and gives early warning when potentially dangerous levels exist. It does not detect fire, smoke, or any other gas. If a dangerous concentration of CO detects by patented and field-proven electrochemical sensor; an LED indicator illuminates and an internal siren activates in temporal 4 pattern.
The Interlogix Wireless Carbon Monoxide Detector for Simon (CO) alarm monitors the levels of CO gas and gives early warning when potentially dangerous levels exist. It does not detect fire, smoke, or any other gas. If a dangerous concentration of CO detected by patented and field-proven electrochemical sensor, an LED indicator illuminates. Also an internal siren activates in temporal 4 pattern. The CO alarm also transmits an alarm signal to the control panel within 15 seconds. Of detecting a dangerous concentration of CO gas.
The ADT Combination CO/Smoke 4 wire combines CO and smoke detection into one device, requiring less wiring and fewer back boxes than two separate devices. Additionally, this detector cell can be easily replaced at end-of-life, resulting in a much lower life cost than having to replace the entire detector.
ADT Combination CO/Smoke 2 wire - Best-in-class provides protection from any CO and smoke detection for your family. The installation uses less wiring and fewer junction boxes, and once installed, it can be easily replaced in the field without a tool. While most detectors are separate for detecting Smoke and CO, this provides both Smoke and Carbon Monoxide detection and is compatible with your security panel to ensure safety.
The ADT Heat Detector Fixed Temp 135 and Rate of Rise offer a low-cost means for property protection against fire, and for non-life-safety installations where smoke detectors are inappropriate.
This detector also offers a full-line of configurations to accommodate a broad range of applications.
The ADT Heat Detector Fixed Temp 194 and Rate of Rise offers a low-cost means for property protection against fire, and for non-life-safety installations where smoke detectors are inappropriate. So with this heat detector, you can rest easy.
The ADT 4 Wire Smoke series smoke detectors represent significant advancement in conventional detection. This is not your mother's smoke detector. Its drift compensation and smoothing algorithms, along with its simplified sensitivity measurement ensure accurate detection and no false alarms.
Additionally, this detector redefines installation ease with its plug-in design. This allows an installer to pre-wire bases (included with heads). The large wire entry port and in-line terminals also provide ample room for neatly routing the wiring inside the base. Additionally, the base accommodates a variety of back box mounting methods as well as direct mounting with drywall anchors. And finally, to complete the installation, just plug the heads into the base with a simple Stop-Drop ’N Lock™ action.
ADT Ceiling Mount Motion Detector Hardwired is a wired passive infrared motion detector that is designed to be mounted on the ceiling of a room. You should mount this detector on the ceiling in the center of the protected area, between 8’ and 12’ high, for optimal performance. A ceiling-mounted motion detector helps minimize vandalism, especially when being used in a public place. Smaller and more streamlined than a smoke detector, the ADT Ceiling Mount Motion Detector Hardwired is an ideal choice to protect an interior space with minimal visual detraction.