Search

This Product is no longer available. This ADT Interlogix Wireless Door Window is a great option. For more options check out our Wireless Door/Window Sensors category. Interlogix Window Sensor with Shock from Interlogix is a crystal shock sensor (White) excellent first line of defense for detecting the possibility of an intrusion due to forced entry. Featuring a unique, advanced micro-controller, the wireless sensor detects vibrations made by an intruder when trying to break or open a window or door before they enter the premises. The sensor also contains two internal reed switches allowing it to be used as a standard door/window contact. When the sensor detects vibrations, a momentary open circuit is triggered in the shock element of the sensor. The circuit closes again when the vibration stops. The sensor micro-controller "sees" the open/close action as a pulse, causing the sensor to transmit an alarm signal. The sensor has two different detection modes: Gross Attack, which detects a violent blow sufficient to trip the sensor; and Pulse Count, which detects a sufficient number of less violent blows, such as repeated rapping and tapping. Compatible with Interlogix Simon XTI5Simon XT, and the Concord 4 control panels. Because it uses the same frequency as Qolsys, it is also compatible with the IQ Panel and the IQ Panel 2.

The Siren in Stainless Steel Enclosure 118dB is a self-contained siren in a tamper and corrosion-resistant stainless steel enclosure. It features two sealed reed tamper switches: one on the backplate and one on the front cover. Additionally, the switches are normally closed as well as pre-wired in series. The Siren in Stainless Steel Enclosure 118dB can also produce two distinct sounds from a single input trigger.

Back UP Power Strip 900VA 500W is a low-cost high-performance UPS line that provides the features needed to protect your valuable equipment. Includes eight outlets, and four of them provide battery support along with spike and surge protection.  have four each of the outlets described above for total protection of up to eight connected devices. In addition, all units have outlets which are specifically spaced to support transformer blocks. In addition, it is wall mountable, under desk mountable, LCD display, noise filtering, overcurrent protection, short-circuit protection.

This product has been discontinued. You can purchase a similar battery backup here. 

Back UP Power Tower 1500VA 1050W provides battery backup, power protection with true sine wave output, and surge protection for corporate servers, department servers, storage appliances, network devices, and telecom installations requiring Active PFC power source compatibility. The AVR is essential where power fluctuations occur frequently. Supplies power long enough for the equipment to properly shut down when utility power fails.

Back UP Power Strip 750VA 450W is a low-cost high performance UPS line that provides the features needed to protect your valuable equipment.. Including LCD front panel display provides clear, readable information about the UPS: Input voltage, output voltage, battery capacity (in percent capacity), estimated runtime, input frequency, AC normal, battery mode, UPS fault, overload, output frequency, weak/bad battery, alarm silence display, connected load consumption (in percent load).

This product has been discontinued. You can find a similar backup battery here. 

Back UP Power Strip 600VA 300W can help protect your electrical equipment from surges and other power issues, As a versatile device, useful with a desktop or wall mount. This device backup provides 3.2 minutes at 300W full load, and 8.9 minutes at 250W half load. This stand-by Back UP Power Strip 600VA 300W can be used for all of your electrical equipment to help keep it safe from power surges and failures. Main features include, Three UPS outlets and three surge-only outlets and Two transformer-friendly spaced outlets perfect for AC adapters.

This product has been discontinued. You can find a similar backup battery here. 

The Back UP Power Strip 400VA 200W is the back up power strip you need to power your devices. It was designed for desktop, floor and wall mounting. Additionally, it has surge protected outlets. It also provides the features needed to protect your valuable equipment In addition, you can choose between Back UP Power Strip 400VA 200W,Back UP Power Strip 600VA 300W, Back UP Power Strip 750VA 400W, and finally, Back UP Power Strip 900VA 500W. But if this isn't quite what you're looking for, please take a look at our other battery backups. Additionally, these power strips come in packs of 4.

Back UP Power Tower 550VA 330W Efficient Automatic Voltage Regulation (AVR) Hardware Regulates output voltage protection against spikes, surges, brownouts, and blackouts.  Protect all of your devices - 8 power battery backup and surge-only outlets ensure space for all pieces of the system. Provides total Control of Your Power - Free download of Minuteman SentryHD management software connects via USB and provides total monitoring and management capability as well as Independent Battery Bypass - Provides voltage regulation with surge and spike protection, even when batteries are weak or dead.

Alarm.com System Enhancement Module with CDMA Cellular Communicator is the best cellular communicator and comprehensive solution to migrate compatible Honeywell/ADEMCO Vista 20P and VISTA-15P panels to Alarm.com’s award-winning interactive services. Web features from Alarm.com include viewing system and sensor status/history, arming and disarming the system, setting up and managing user codes, and creating customized e-mail and text message notifications for any type of alarm or non-alarm activity at the property.