Pro Series Hardwired Module is a reliable and efficient wired-to-wireless module specifically designed for the Proseries 7 All-in-One Touchscreen Panel. This module is created to integrate existing wired sensors with the proseries system controllers or panels. It provides an option to maintain the existing hardwired sensor setup with 8 zone capacity. If you have more than 8 hardwired zones you would need additional modules.

The Pro Series Hardwired Module is powered through 5VDC transformer and comes with a backup 3.6 VDC, 2480mAh lithium-ion battery. This module uses tamper detection which sends messages to the system to know if someone tries to open up the module. It also provides RF supervision so that the system will display a warning if it accidentally is powered down or taken out of signal range from the system.

Main Features:

• It is simple to install and extremely flexible.
• One button calibration automatically configures the device by learning what zones are in use.
• An included power supply is backed up with a standard rechargeable battery.

Specifications:

• Power Supply: 5VDC (Part Number 300-10259)
• Max Wire Distance: 6′ @ 22 AWG; 10′ @ 20 AWG; 16′ @ 18 AWG
• Battery: Included Plug-In 3.6VDC, 2480mAh
• Battery Standby Time: 24 Hours if No Devices Using Aux. Power; 4 Hours if 2 Devices using Aux. Power
• Wireless Communication Range: More than 300 Feet from Panel (Open Air)
• Wireless Encryption: 128-bit AES
• Number of Supported Zones: Eight (8)
• Zone Wiring: Max 1,000 Feet per zone
• Auxiliary Power: 12VDC @ 100mA (Maximum 2 Devices Connected)
• Resistors Included: Eight (8) 2.2K Resistors (Red-Red-Red-Gold)
• Mounting Hardware: Included (Double-Sided Foam Tape & Screws)
• Dimensions: 7″L x 4.5″W x 1.5″D
• Operating Temperature: 14°F to 140°F
• Battery Charging Temperature: 32°F to 140°F
• Operating Humidity: 5% to 95%, Non-Condensing

For more information on security or some of our products you can visit our YouTube channel here