How to install

1. Plug the barrel jack end of power supply into the back in the DC In port
2. Connect ethernet cable Into the Wan port
3. Connect ethernet cable to modem
4. Plug in the power supply into the wall
5. Add additional units as needed for more coverage.

How to Pair to IQ Panel

1. Tap the top horizontal bar above the clock
2. Click Settings
3. Touch advanced settings
4. Type in installer code
5. Click on Wifi
6. Look for SSID: IQ WIFI
7. Enter password on sticker or bottom of the router (the S/N is the default password)
8. Touch Connect
9. If you want to rename the network (SSID) go to Devices>WiFi devices and click on IQ WiFi
10. Touch the down arrows to make edits to the Network Name
11. Enter a unique network name and password and touch save

How to add additional units

1. Power up additional IQ Wifi
2. Touch the WPS button on the main unit (the first one)
3. Touch the WPS button from the unit you are adding
4. Allow 3-4 minutes for it to pair and auto-update

Helpful tip to check where to place agents

1. If you have an iphone download the airport utility app, then go under your settings and scroll down until you find it. Then turn on Wi-Fi Scanner. Then open the app and scan. If you have an Android phone then download the WiFi Analyzer app.
2. Check to make sure that the signal strength is -65dB or greater. (closer to 0 the better) If you place an agent further than -70dB away you risk it not working properly.

How to pair an alarm.com camera to the IQ WIFI

1. Push the button on the back of the camera until the light is flashing blue, then press the WPS button on the IQ WiFi. It should then connect and the light on the camera should change to a solid green. If it does not check to make sure your IQ WiFi is connected to the internet and that your signal strength is better than -70dB.
2. The other way you can try is to push the button on the back of the camera until you get a white flashing light. This is called access point mode. Then you can use a web enabled device like your phone, tablet, or laptop to connect to the WiFi that the alarm.com camera is putting off. Then go to 192.168.1.1 and scan for the IQ WiFi network. You can then enter the password and it should connect and turn solid green.

How to log into the admin on the IQ WiFi from a browser

1. Go to 192.168.105.1 from a Chrome browser.
2. The default login is admin and the password is the S/N on the bottom of the device.
3. You can then manage and change settings from the browser like changing the name of the network and the password, check for firmware updates, set port forwarding, etc…

Please check out our YouTube Channel for more information.