Description:

Firstly, The Interlogix Wireless Smoke Detector is a supervised photoelectric smoke alarm. In addition, they are also self-diagnostic with a 319.5MHz transmitter, built-in sounder. Also low battery annunciation, diagnostic/status LED, as well as integrated fixed temperature and rate-of-rise heat sensors. Furthermore, each unit will communicate an alarm as well as trouble condition to a compatible control panel.  In addition, the mounting tamper will also send a trouble condition if someone tries to remove it. In addition, The Interlogix Wireless Smoke Detector is also compatible with Interlogix Simon XTI5, Simon XT, as well as the Concord 4 control panels.  Finally, because it uses the same frequency as Qolsys, it is also compatible with the IQ Panel as well as the IQ Panel 2.

Interlogix Wireless Smoke Detector Features:

• In addition, features Long Life 3V Lithium Battery Operated
• Learn Mode for Easy Programming
• As well as Reliable 319.5MHz Crystal Transmitter
• Low Battery Pre-alarm Sent to Control Station
• Field Replaceable Optical Chamber
• While featuring Automatic Drift Compensation
• Integral Heat Detection
• Built-in 85dB Temporal Sounder
• Hush Feature
• Includes Low Battery Pre-alarm Sent to Control Station

Specifications

Electrical

Voltage 3 VDC
Average standby current 35 µA, typical
Furthermore, Test current 2 mA, typical
As well as an Alarm current of 70 mA, typical
Battery type 3V lithium
Low battery threshold 2.7 V additionally causes low battery signal

Features

Sounder 85dB at 10 ft., temporal pattern
Low battery beep rate 1 every 45 ±2 seconds
Sensitivity 2.3% ± 0.890%

Environmental

Operating temperature 40 to 100°F (4 to 38°C)
Operating humidity range 0 to 95% noncondensing
RF immunity 20V/minute minimum; 1 to 1000 MHz
Drift compensation adjustment 0.5%/ft. maximum
Furthermore, The Rate of rise 15°F/minute > 105°F (8.3°C/minute > 40.6°C)
Also Fixed 135°F ± 5°F (57.2°C ± 2.8°C)
RF frequency 319.5 MHz
Transmitter ID Preprogrammed, 1 million codes
Modulation type – AM
Signal format – Pulse-width modulation
Output types  – Alarm, restore, tamper, low battery, trouble, as well as 1 hour Supervisory

Physical

Color White
Alarm dimensions 5.6 x 2.4 in. (142 x 61 mm)
Base dimensions 5.4 x 0.46 in. (137 x 12 mm)