Product Description:

ADT Honeywell Security Interface Module HSPIM is a device that creates an addressable zone input for a conventional detection device. This device is required when connecting a Vista or Lynx panel to an ADT Pulse Gateway or iHub. It offers a connection to an addressable bus and a supervised zone input. When the zone input is open, the module sends status data to the control panel indicating the open position. When the zone input is shorted, the module sends status data to the control panel, indicating the shorted condition.  As long as the zone input is normal, the module sends data to the control panel, indicating the normal condition.

Users see the status and alarms from the sensor at the local keypad. The control panel can also send a message to the monitoring station. You can also check out other ADT Pulse Equipment here in our shop.

Reasons to choose this device:

• It provides some important advantages. The module reduces installation labor by its special design. By providing an addressable zone input, using this module dramatically reduces the overall cost of the entire system.
• The cable is an addressable bus that allows connection to many devices before cabling and connecting to the control panel for processing.
• The module is protected against transients, helping the module to overcome voltage spikes causes by lightning or misconnections.
• It saves costs by saving current and minimizes the need for additional power supplies because of its low current requirements.