Description:

The ADT Carbon Monoxide Detector Wired is a must-have addition to your ADT Security System for keeping you and your family safe from the dangers of carbon monoxide poisoning. The ADT Carbon Monoxide Detector is wired to the main panel and installed on the wall of your home or business and will detect any quantity of CO gas in the environment for up to 10 years. After 10 years it will reach its end of life and send a trouble signal to the alarm panel. Once you have reached the date code on the ADT Carbon Monoxide Detector it must be replaced. The good news is that it is easy to purchase and replace. Click here for the wireless carbon detector.

This model has a Real Test feature that will allow you to test the detector with a can of canned CO to make sure that it is working properly when you first install it.

If you have a different ADT System check out these other compatible ADT Carbon Monoxide Detectors:

• ADT Carbon Monoxide Detector Compatible with Safewatch Pro 3000, Vista Panel, Lynx, as well as Quick Connect.
• ADT Carbon Monoxide Detector Compatible with DSC Impassa.

ADT Carbon Monoxide Detector Wired Features:

• A 10-year end-of-life timer
• RealTest® enables a functional test using canned CO
• A code-required trouble relay
• Wiring supervision with SEMS terminals
• 12/24 VDC
• A low current draw of 20 mA in standby and 40 mA in alarm
• Versatile mounting for wall and ceiling
• Accurate and reliable electrochemical sensing technology
• Optional Replacement Plate to upgrade previously installed competitor detectors
• tested up to 12,000 feet above sea level

Physical Specifications:

Length: 5.1 in (130 mm),
Width: 3.3 in (84 mm),
Height: 1.3 in (33 mm)
Approximate Weight 7 oz (198 g)
Operating Temperature Range 32°F to 104° F (0°C to 40° C)
Operating Humidity Range 22 to 90%
RH Input Terminals 14 to 22 AWG
Mounting Single-gang back box; surface mount to a wall

Electrical Specifications:

Operating Voltage 12/24 VDC
Audible Signal 85 dB in alarm
Standby Current 20 mA
Alarm Current 40 mA (75 mA test)
Alarm Contact Ratings 0.5 A @ 30 VDC
Trouble Contact Ratings 0.5 A @ 30 VDC

Installation Instructions:

• Using a small, flat head screw driver, push in the small tab located on the underside of the detector. Once the snap is loosened, lift the bottom end of the cover up and unhinge the top to remove the cover.
• Wire the detector base screw terminals
• Screw the base of the detector onto a single gang electrical box, or to the surface of the wall or ceiling. Use the hardware included in the packaging.
• If mounting with replacement plate hold the plate over the desired area, use hook feature to hold onto the replacement plate, mount detector and plate together
• Hinge the top portion of the cover onto the base; with the cover at a 45 degree angle, fit the hinges into the slots of the base.
• Push the unhinged bottom portion of the cover down until it snaps into place.
• After all detectors have been installed, apply power to the alarm control unit.
• Test all new units with the ADT monitoring station