Description:

The Interlogix Heat Detector, aka Rate-of-Rise and Fixed Temperature Heat Detector offers an effective fire safety solution for environments with high likelihood of rapid fire development, or where optical smoke detectors cannot be used due to high dust conditions.

This part discontinued and replaced with a newer smaller version.

These detectors- designed to monitor the room temperature and activate the alarm if the temperature gets too high or increases rapidly.

With the Interlogix Heat Detector, a temperature increase at the sensor of 15°F (9°C) or more per minute activates the rate-of-rise feature.

General:

This closes the contacts in the sensor to transmit the alarm condition to the alarm control panel. When the rate-of-rise element alone activates, the sensor is self-restoring. With combination rate-of-rise and fixed temperature detectors. The fixed temperature element ativates when the temperature of the center disk rises to the sensor’s rated temperature. This closes contacts in the sensor and transmits an alarm condition to the fire alarm control panel. The fixed temperature element is non-restorable and, when activated. The need for replacement indicates when the center disk has popped away from the detector. When selecting the location on the ceiling for the heat sensor, do not locate it in direct path of hot or cold airflow. Refer to the detector specifications for the recommended maximum spacing. Obtain Earlier detector response by reducing the spacing between detectors.

Compatible with Simon 2/3, XT, XTI, as well as Concord Panels.