Firstly, The ADT Safewatch Pro 3000 Vista Control Panel is also known as the Vista 20P Honeywell Control Panel. It also has up to 48 zones of protection, graphic keypad support, and dual partitions. The ADT Safewatch Pro 3000 Control Panel also gives you the ability to send alarm signals from a phone line as well as a cell radio. Supports up to eight numeric or alpha keypads or 7″ color touchscreen keypads.

Additionally, the ADT Safewatch Pro 3000 Vista Control Panel / VISTA-20P, also used with an AlarmNet® Internet or 4G communicator, Additionally, installed on the premises without TELCO (phone) lines.

This hardwired siren is compatible with the Vista 20P Panel, the DSC Neo Panels, the IQ Pro Panel, and the Power G Hardwire Module.

If this siren isn’t what you need, check out our other sirens.

Features of the ADT Safewatch Pro 3000 Vista Control Panel:

• Compatible with up to eight numeric or alpha keypads or 7″ color touchscreen keypads.
• Wireless keys can be programmed without using zones
• Eight on-board hardwired zones standard (15 when Zone Doubling feature is used)
  – 40 hardwire expansion zones (if you add zone expanders)
  – 40 wireless expansion zones (if you have the high wireless receiver)
• Two low current on-board trigger outputs
• 100 Event Log viewable at system keypads with time/date stamp
• 48 system user codes assignable to either partition
• While it is expandable to 48 total zones when used with hardwired and/or wireless expansion modules
• Two independent partitions plus a common partition
  – Global Arming from any system keypad
  – Go to function to view or operate one partition from the other
  – Separate partition account numbers
• 16 output devices
  – Relays
• Four installer-configurable zone types also allow the installer to create custom zone types by assigning all zone attributes
• Supports four-wire and up to 16 two-wire hardwired smoke detectors
  – Also, works with Sentrol CleanMe™ maintenance signal
• Multiple actions on output devices depending on system state
  – Turns lights off when system arms
  – Turns the same light on when the system disarms
  – Flashes the same lights when the system is in alarm
• Built-in phone line cut monitor with programmable delay as well as annunciation options
  – Display on system keypads
  – Trigger local sounders
  – Trigger system bell

Security Dealer Features

• Automatic System Load Shed
  – During extended AC power fails, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries.
• Dynamic Signaling
  – Also reduces redundant reporting to the central station as a result of using multiple reporting methods; i.e. digital dialer as well asAlarmNet radio

Valuable End-User Features

• Viewable on system keypads:
  – Exit countdown
  – Time and date display*
  – Event log*
• Auto keypad backlighting on entry
• Keyswitch arming
• Programmable macro buttons and single-button arming
• Also supports a variety of wireless remote controls for single-button operation
  User Scheduling
  – Latchkey also reports to pagers
  – Auto arm/disarm
  – “User access” time windows
• VIP Module also allows system control from any touch-tone phone
  Chime by zone

*Requires custom alpha keypad

Compatible Devices

• Keypads – Numeric, Alpha, Touchscreen, Numeric with wireless receiver, Alpha with wireless receiver
• Wireless Receivers – high (up to 40 zones), medium (up to 16 zones)
• Wireless Sensors – Door Sensor, Window Sensor, Motion Detector, Smoke Detector, Carbon Monoxide Detector, Flood Sensor, Temperature Sensor, Keychain Remote, Garage Tilt Sensor,
• Zone Expander – with relay
• Transformers – Back-Up Batteries – 4 amp, as well as 7 amp
• Hardwired Sirens