Shop

Wireless Flood and Temperature Sensor

(1 customer review)

$100.00

The Wireless Flood and Temperature Sensor works best for applications including bathrooms, laundry rooms, furnace rooms, basements, and garages. The sensor also helps protect against temperature fluctuations. As well as flood conditions, reacting within 22 seconds when water is present. If the temperature drops below 45° or above 95° it will trigger the alarm. The versatile device configures to operate as a standalone temperature sensor, a flood detector or a combination temperature/flood detector. In addition, it’s fully compatible with Safewatch Pro 3000, ADT Quick Connect, ADT TSSC, as well as 2GiG Panels. Furthermore, It also sends users alerts when detecting floods or extreme temperatures providing quicker time to take action to minimize as well as avert damages.

Out of stock

Description

Wireless Flood and Temperature Sensor Description:

The Wireless Flood and Temperature Sensor works best for applications including bathrooms, laundry rooms, furnace rooms, basements, and garages. The sensor also helps protect against temperature fluctuations. As well as flood conditions, reacting within 22 seconds when water is present. If the temperature drops below 45° or above 95° it will trigger the alarm. The versatile device configures to operate as a standalone temperature sensor, a flood detector or a combination temperature/flood detector. In addition, it’s fully compatible with Safewatch Pro 3000, ADT Quick Connect, ADT TSSC, as well as 2GiG Panels. Furthermore, It also sends users alerts when detecting floods or extreme temperatures providing quicker time to take action to minimize as well as avert damages.

Wireless Flood and Temperature Sensor

Features

  • Two temperature ranges (high, low)
  • Up to 5-year battery life, which reduces user maintenance
  • Completely wireless, which greatly reduces installation time and maximizes placement options
  • Capable of monitoring temperature and flood detection simultaneously

Specifications:

  • SENSOR PARAMETERS
    -Cold Temperature Detector: 45°F (7.22°C)
    -When temperature drops below 45°F (7.22°C) for >10 minutes
    Hot Temperature Detector: 95°F (35°C)
    -When temperature rises above 95°F (35°C) for >10 minutes
    Flood Sensor: When 1/4″ inch of water covers the probes
    -“Swinger Suppression:”
    -(Hysteresis) of 3°F (-16.1°C)
    -Temperature difference between fault and restore points
  • POWER
    -One 3V battery (included)
    -Replace only with: Panasonic CR123A, Huiderui, CR123A, Duracell DL123A, and Honeywell 466
  • OPERATING TEMPERATURE
    -14°F to 104°F (-10°C to 40°C)
  • OPERATING FREQUENCY
    -345 MHz ± 85 KHz
  • RESPONSE TIME
    -22 seconds
  • DIMENSIONS
    -3.1″ L x 1.6″ W x 2.0″D max.
    (7.9cm L x 4.1mm W x 5.8mm D max.)
  • COMPATIBILITY
    -Compatible with all 5800 Series wireless receivers
  • AGENCY LISTINGS
    -FCC Part 15
    -DOC RSS-210

 

Installation:

Water Leak: Place the device flat on the floor or other surface near the area to be protected. Make sure the metal contacts at the bottom are clean and free of any debris. To ensure the unit remains in place, use the supplied 2-sided tape to adhere the unit to the floor or wall.

IMPORTANT: After a water leak event, make sure the contacts and device are completely dry and free of any debris before relocating.

Temperature: While you Mount the device low on a wall in the desired location use double-sided adhesive tape (supplied).

IMPORTANT: In addition, the device should not be relocated without the advice of the installation professional.

TESTING: With control in Test mode, remove & replace the device cover to activate. The system keypad should beep and display each programmed zone (loop).

 

Please check out our YouTube Channel for more information.
Reviews (1)

1 review for Wireless Flood and Temperature Sensor

  1. Michael Donahue

    nice to not have wires with a flood sensor

Add a review

Your email address will not be published. Required fields are marked *