The HD-TVI Dome Camera 2.8mm 2.1MP is the camera you need for high quality images. This series of camera adopts new generation sensor with high sensitivity and advanced circuit design technology. It also features high resolution, low image distortion on, and low noise. So this makes it suitable for surveillance system and image processing system. This camera is switchable between TVI, AHD, CVI, and 960H

But if this isn’t quite what you’re looking for, please take a look at our other HD-TVI cameras.

Features:

• High performance CMOS sensor
• High resolution
• Low illumination
• OSD menu, parameters are also configurable
• Support auto white balance, auto gain control, and also electronic shutter control
• SMART IR mode
• Unit transmission control
• Advanced 3-axis design meets different installation on requirements

HD-TVI Dome Camera 2.8mm 2.1MP Installation Steps:

1. Drill the screw holes and the cable hole according to the drill template.
2. Then fix the mounting base to the ceiling with the supplied screws.
3. Route the cables to the cable hole and connect the corresponding power cable and video cable.
4. Then secure the camera to the mounting base.
5. Fix the enclosure to camera to complete the installation .

Additionally, you can mount this camera with the Small Bullet Camera Mounting Bracket

Specifications

• Camera Image Sensor: 1 / 2.7” Sensor Signal System NTSC/PAL(Euro Version）
• Effective Pixels: 1930(H)*1088(V)
• Min. Illumination 0.01 Lux, 0 Lux with IR
• Shutter speed 1/30(1/25) s to 1/50,000 s
• Lens: 2.8mm Angle of View: 90°
• Day and also Night Synchronization
• Internal synchronization
• NTSC: 1080p@30fps/PAL:1080p@25fps
• Maximum 2 zones
• Motion Detection On/Off
• Working Temperature /Humidity: -40°F – 140°F (-40°C – 60°C) Humidity 90% or less (non-condensing)
• Power Supply: 12V DC Power
• Consumption Max: 3W
• Weather Proof Ratings: IP66
• IR Range: Up to 65ft (20m)
• Weight: 0.9lb(400g)

For more information on security or some of our products you can visit our YouTube channel here