ClareOne Wireless Heat Detector is a reliable sensor that detects the sudden rise of heat in the surroundings. This heat sensor can be set up to detect a fixed temperature of either 135F or 200F. It features a built-in thermistor and uses electronic processing to detect and report rising heat conditions and send communication directly to the ClareOne Wireless Security Home Panel.

The ClareOne Wireless Heat Detector is easy to install and can be mounted almost anywhere to detect a rise in heat conditions. It is powered by a 3V lithium battery providing up to 10 years of battery life. A great addition to early warning devices that protects your home.

Main Features:

• Encrypted 433Mhz Technology – The ClareOne Wireless Heat Detector features encrypted technology that prevents hacking or jamming. It can be used to send a panic alert to the ClareOne Panel. It can be mounted to a wall or ceiling to communicate a rise in temperature to the ClareOne Panel.
• Temperature – The ClareOne Rate of rising Heat Detector detects temperature rising above 135°F (57°C) or a rate of rise at 12°–15°F (6.7°–8.3°C) per minute.
• Automatic Reset – The Heat Detector features an automatic reset after the sensor cools down.
• Tamper-Protected Case – The ClareOne Rate of Rise Heat Detector features a tamper-protected case and audible warning when detected.
• Simple Mounting – The heat detector features a ceiling-style mount with a very small footprint.
• Simple Setup – Pairs easily and quickly with the ClareOne Panel.

Specifications:

• Transmitter frequency: 433MHz
• Encrypted: Yes
• Transmitted indications: Tamper and low batter
• Supervisory keep-alive: 60 to 70 minutes
• Maximum UL spacing: 50 x 50 ft (15.2 x 15.2 m)
• Rate of rise rating: 12 to 15°F (6.7 to 8.3°C)
• UL max ambient ceiling: 100 to 150°F (37.8 to 65.6°C)
• Battery type: CR123A
• Battery life: 8 to 10 years
• Temperature detection: 135º F rate of rise
• Heat rate of rise detection: 15º F per minute
• Operating environment
• Temperature: 32 to 150°F (0 to 65.6°C)
• Relative humidity: 0 to 95% non-condensing
• Dimensions: 2.29 × 1.28 in. (58.25 × 32.4 mm)

Installation Guide:

• Heat detectors are normally installed in areas that are prone to smoke such as kitchens and garages.
• Installation notes:
  • Avoid areas that may have rapidly increasing temperatures such as fireplaces, stoves, heaters, etc.
  • When mounting the detector should be placed on a ceiling at least 4 inches away from any wall. If placed on a wall the detector must be within 6 inches of the ceiling.
  • If using the sensor with the heat setting at 135°F make sure the ceiling location does not exceed this temperature.

Please check out our YouTube Channel for more information.