Shop

ClareOne Glassbreak Detector

(1 customer review)

$120.00

The ClareOne Glassbreak Detector is a wireless ceiling- or wall-mounted sensor that hears and alerts the ClareOne Wireless Home Security Panel to the sound of breaking glass. The detector offers a maximum detection range and has a 360-degree field of perception for sound. It features an alarm, tamper, and low battery signal outputs.

 

SKU: 3154 Categories: ,
Description

The ClareOne Glassbreak Detector is a wireless ceiling- or wall-mounted sensor that hears and alerts the ClareOne Wireless Home Security Panel to the sound of breaking glass. The detector offers a maximum detection range and has a 360-degree field of perception for sound. It features an alarm, tamper, and low battery signal outputs.

Main Features:

  • Encrypted 433Mhz Technology – It features encrypted technology that prevents jamming or hacking. It can be mounted to a wall to communicate the sound of breaking the glass to the ClareOne Panel.
  • Long-Lasting – Replaceable extra long-life lithium batteries.
  • Long-Range Detection – Provides a maximum detection range and can sense sound in a 360º pattern up to 20′ from the detector.
  • Tamper-Protected Case – The ClareOne Glass Break Detector features a tamper-protected case and audible warning when detected.
  • Simple Setup – Pairs easily and quickly with the ClareOne Panel.

Specifications:

  • Frequency transmitter: 433MHz
  • Encrypted: Yes
  • Transmitted indications: Tamper and Low Battery
  • Supervisory keep-alive: 60-70 minutes
  • Glass thickness: Plate glass at 3mm thickness
  • Microphone: Omni-directional with 360º coverage pattern
  • Maximum detection range: 20 ft (6m) radius and 360° coverage pattern
  • Minimum detection range: 4 ft (1.2m)
  • Battery Type: (2x) 3VDC Lithium Battery, CR123A
  • Battery Life: Up to 8 years
  • Operating Temperature: 14° to 122°F (-10° to 50°C)
  • Storage Temperature: -30° to 140°F (-34° to 60°C)
  • Operating Humidity: 95% non-condensing
  • Dimensions (W x H x D): 3.9″ x 2.75″ x 1.5″ (99.06 x 69.85 x 38.1 mm)

Installation Guide:

  • By depressing the lock and separating the top cover from the bottom cover, you may access the sensor.
  • Place the sensor where it will be used, then install it using the provided screws or 3-meter tape.
  • Use the supplied screw and lock washer to mount the magnet in the chosen spot, making sure the alignment mark coincides with the sensor mark.
  • Installation notes:
    • It is advised that the device be installed at least 6.5 feet in the air (1.98m).
    • When installing the device near active ultrasonic sensors, at least 4 feet must separate the units (1.2m).
    • All glass locations that need to be watched over must be in the unit’s direct line of sight. No more than 20 feet must separate the unit from the farthest monitored glass point (6.05m).

Please check out our YouTube Channel for more information.

Reviews (1)

1 review for ClareOne Glassbreak Detector

  1. Cristen Cordova

    This is worth the money! I would definitely recommend this product to my family

Add a review

Your email address will not be published. Required fields are marked *