The CDMA Interactive Gateway Module connects panels to GSM Network. No need for a landline or internet connection. Additionally, it enables Alarm Reporting, Interactive Control Functions, and Ethernet data reliability.  It also includes The Z-Wave communicator, which allows automation of doors, lights, and thermostats.

But if this isn’t what you’re looking for, please take a look at some of our other Resolution products.

Features:

• Connects to the panel keypad bus
• Field switchable to support DSC PowerSeries, Honeywell Vista, NX, or also GE Interlogix Concord.
• Enables both alarm reporting and interactive arming from smartphones.
• Optional Z-Wave card for added home automation features.

Key Instructions

• The same unit works for Vista, Power Series, Concord 4.
• Selectable switch determines panel compatibility.
• DO NOT MOUNT INSIDE METAL CAN – there are radios on the boards that need to be in free-air to communicate.
• Should connect communicator to a 12V power supply with battery backup, such as the control panel’s aux power output.
• The communicator should be mounted in a location that will optimize cellular signal strength. Mount as high in the building as possible.
• CDMA Interactive Gateway Module communicates with the Vista.

Operation:

• Event Reporting: Events are reported to both the monitoring receiver and the interactive server. All events use Contact ID reporting codes. It reports following events by default: Alarms System Low Battery,  Alarm cancels System Low Battery Restoral, Openings AC Power Fail (delayed by some panels), Closings AC Power Restoral (delayed by some panels).
• Vista Only: Can enable additional events for reporting if desired by enabling the desired event reports in system programming.
• Interactive Control: You can remotely control the system through the interactive platform. The arm/disarm control and status applies to partition 1 only.
• Z-Wave: Can control Z-Wave devices via the Interactive function.