Description

The ADT Wireless Aesthetic Door Sensor and Window Sensor is the perfect mix of wireless range and aesthetically pleasing design. While the corners of the sensor are rounded and the profile flatter than the typical sensor, it still has the same 200′ nominal range found with the bigger and boxier standard sensor.

It is compatible with all ADT Quick Connect, Safewatch Pro 3000, ADT Command, and all Honeywell wireless alarm receivers.

The Aesthetic wireless window and door sensor is also unique in that it is a (2) zone transmitter. The first zone (or loop) assigns to the internal closed-circuit wired terminals. Also uses it to wire the Aesthetic sensor to a hardwired window or door sensor. When used this way, the Aesthetic sensor is acting as a wireless transmitter to transmit any alarms from the hardwired sensor back to the Honeywell alarm system. The Aesthetic wireless sensor also has a second zone (loop) that associates with the internal reed switch so the Honeywell Aesthetic can act as a normal door and window sensor too. You can even utilize both zones at the same time to maximize the value of the Aesthetic sensor.

When using the Honeywell ADT Aesthetic as a door and window contact the included magnet oriented along (2) different sides. You must mount the magnet within 1/2″ of the window and door contact but it mounts along the short edge where the cover’s tab located along the long side that has the internal reed switch.

The ADT Aesthetic window and door sensor includes a lithium battery that will last (3) to (5) years with normal use.

Features

• New sleek design
• Two reed switches
• Transmits supervisory, tamper and low battery messages
• Includes a supervised replaceable CR123 battery
• Dimensions: 3″ H x 1-1/2″ W x 7/8″ D