Shop

ADT Pet Immune Motion Detector Hardwired

(1 customer review)

$120.00

The ADT Pet Immune Motion Detector Hardwired is a Pet Immune passive infrared (PIR) motion detector. This motion detector provides interior protection for both home and business security applications. Additionally, it’s compatible with most hardwired security systems. It’s also ideal for use with Honeywell’s Vista line of wired alarm control panels. This detector is also sensitivity selectable with two modes of pet immunity. There’s a setting for animals up to 40 lbs and another mode for animals up to 80 lbs. Discontinued and replaced with this hardwired motion detector.

Out of stock

Description
ADT Pet Immune Motion Detector Hardwired Description:

The ADT Pet Immune Motion Detector Hardwired is a Pet Immune passive infrared (PIR) motion detector. This motion detector provides interior protection for both home and business security applications. Additionally, it’s compatible with most hardwired security systems. It’s also ideal for use with Honeywell’s Vista line of wired alarm control panels. This detector is also sensitivity selectable with two modes of pet immunity. There’s a setting for animals up to 40 lbs and another mode for animals up to 80 lbs. Discontinued and replaced with this hardwired motion detector.

Like all Honeywell hardwired motion sensors, this motion connects to the alarm system via a four wire connection, two wires for the panel’s auxiliary 12V power circuit, and two wires for the zone data. For your convenience, this detector can be corner, wall, or bracket mounted. This allows you to direct the field of view in the optimum direction for maximum coverage. The recommended mounting height for the motion is 7.5’ to 9’ high. Aim the motion detector away from windows or heating and cooling devices. You’l also want to avoid direct or reflected sunlight to cut down on the possibility of false alarms.

Operation:

Make sure the area you intend to cover with the motion detector is in the direct line of sight of the ADT motion. The coverage pattern extends outward in a 90 degree angle and extends to an area of 35’ x 40’.  Additionally, you can set the detector for different sensitivity levels using the dip switches inside the sensor on the circuit board. You can also set low and high sensitivity, as well as immunity for an 80 or 40 pound pet. If you don’t need pet immunity, we recommend you remove the factory installed pet immune lens, and exchange it with the included High Security lens. Additionally, sections of the lens can be masked, or blocked off to alter the detection pattern away from areas that may cause false alarms.

A red LED allows you to walk test the ADT motion and know when the PIR detector is activated. This ensures that you’ve set the device for the coverage pattern intended. The Honeywell PIR motion detector is the ideal sensor for interior protection for wired home and business security systems.

Reviews (1)

1 review for ADT Pet Immune Motion Detector Hardwired

  1. Ryndell Manuel (store manager)

    As a pet owner concerned about both home security and the safety of my furry companions, I decided to upgrade my ADT security system with the ADT Pet Immune Motion Detector. This hardwired motion sensor has exceeded my expectations! Really recommended!

Add a review

Your email address will not be published. Required fields are marked *