The ADT Card Reader with Keypad Option 26 has a weatherproof design and architecturally attractive enclosure which allows easy mounting indoors or out. This card reader is also ideal for applications requiring a larger read range.

Features:

• Additionally affords high reliability, consistent read range characteristics, and low power consumption in a single, easy-to-install package.
• Features multicolor LED, internal or host control of the LED, and/or beeper and a beeper “off ” switch for silent operation.
• Also provides Wiegand protocol interface compatibility with all standard access control systems.
• Offers an optional, fully integrated personal identification number keypad for heightened security.
• Also can be mounted to glass (using the optional glass mounting kit).
• For a longer read range, try the new generation ProxPro II Reader, which provides an additional inch (2.5 cm) of read range, also requires just 5 volts for operation, and is lower-priced than the ProxPro Reader!

Specs

• 125 kHz Wall Switch Proximity Reader
• Charcoal Gray
• Keypad, Terminal Strip
• Configuration: Beep on, LED normally red, reader flashes green on tag read

Additional Specifications:

• Typical maximum read range
  -ProxCard II Card – up to 8″ (20 cm)
  -ISOProx II Card – up to 7″ (17.5 cm)
  -DuoProx II Card – up to 7″ (17.5 cm)
  -Smart ISOProx II Card – up to 7″ (17.5 cm)
  -Smart DuoProx II Card – up to 7″ (17.5 cm)
  -HID Proximity & MIFARE card – up to 7″ (17.5 cm)
  -ProxCard Plus Card – up to 3″ (7.5 cm)
  -ProxKey II Keyfob – up to 3″ (7.5 cm)
  -MicroProx Tag – up to 4″ (10.2 cm)
  -ProxPass Active Vehicle Tag – N/A
• Dimensions: 5.0″ x 5.0″ x 1.0″ (12.7 x 12.7 x 2.54 cm)
• Power Supply: 10-28.5 VDC; Linear power supplies also recommended.
• Reverse voltage protection also included.

Current Requirements:

• Average: 100 mA (12 VDC)
• Peak: 120 mA (24 VDC)
• Operating Temperature: -22° to 150° F (-30° to 65° C)
• Operating Humidity: 0-95% relative humidity non-condensing
• Weight: 12 oz. (336 gm)

Cable Distance:

• Wiegand or Clock and Data interface: 500 feet (152 m)
• RS-232 interface: 50 feet (15 m)
• RS-422 interface: 4000 feet (1219 m)
• Recommended cable is ALPHA 1295 (22 AWG) 5 conductor stranded with overall shield or equivalent.
• Additional conductors may also be required for LED or beeper control. RS-422 requires ALPHA 6212C 2-Twisted Pair, shielded cable with drain wire, or equivalent for data, plus ALPHA 1292C two-conductor shielded or equivalent for DC power.

Please check out our YouTube Channel for more information.