Shop

ADT Card Reader with Keypad Option 26

(1 customer review)

$660.00

The ADT Card Reader with Keypad Option 26 has a weatherproof design and architecturally attractive enclosure which allows easy mounting indoors or out. This card reader is also ideal for applications requiring a larger read range.

SKU: 1425 Categories: ,
Description

The ADT Card Reader with Keypad Option 26 has a weatherproof design and architecturally attractive enclosure which allows easy mounting indoors or out. This card reader is also ideal for applications requiring a larger read range.

Features:
  • Additionally affords high reliability, consistent read range characteristics, and low power consumption in a single, easy-to-install package.
  • Features multicolor LED, internal or host control of the LED, and/or beeper and a beeper “off ” switch for silent operation.
  • Also provides Wiegand protocol interface compatibility with all standard access control systems.
  • Offers an optional, fully integrated personal identification number keypad for heightened security.
  • Also can be mounted to glass (using the optional glass mounting kit).
  • For a longer read range, try the new generation ProxPro II Reader, which provides an additional inch (2.5 cm) of read range, also requires just 5 volts for operation, and is lower-priced than the ProxPro Reader!
Specs
  • 125 kHz Wall Switch Proximity Reader
  • Charcoal Gray
  • Keypad, Terminal Strip
  • Configuration: Beep on, LED normally red, reader flashes green on tag read
Additional Specifications:
  • Typical maximum read range
    -ProxCard II Card – up to 8″ (20 cm)
    -ISOProx II Card – up to 7″ (17.5 cm)
    -DuoProx II Card – up to 7″ (17.5 cm)
    -Smart ISOProx II Card – up to 7″ (17.5 cm)
    -Smart DuoProx II Card – up to 7″ (17.5 cm)
    -HID Proximity & MIFARE card – up to 7″ (17.5 cm)
    -ProxCard Plus Card – up to 3″ (7.5 cm)
    -ProxKey II Keyfob – up to 3″ (7.5 cm)
    -MicroProx Tag – up to 4″ (10.2 cm)
    -ProxPass Active Vehicle Tag – N/A
  • Dimensions: 5.0″ x 5.0″ x 1.0″ (12.7 x 12.7 x 2.54 cm)
  • Power Supply: 10-28.5 VDC; Linear power supplies also recommended.
  • Reverse voltage protection also included.
Current Requirements:
  • Average: 100 mA (12 VDC)
  • Peak: 120 mA (24 VDC)
  • Operating Temperature: -22° to 150° F (-30° to 65° C)
  • Operating Humidity: 0-95% relative humidity non-condensing
  • Weight: 12 oz. (336 gm)
Cable Distance:
  • Wiegand or Clock and Data interface: 500 feet (152 m)
  • RS-232 interface: 50 feet (15 m)
  • RS-422 interface: 4000 feet (1219 m)
  • Recommended cable is ALPHA 1295 (22 AWG) 5 conductor stranded with overall shield or equivalent.
  • Additional conductors may also be required for LED or beeper control. RS-422 requires ALPHA 6212C 2-Twisted Pair, shielded cable with drain wire, or equivalent for data, plus ALPHA 1292C two-conductor shielded or equivalent for DC power.

Please check out our YouTube Channel for more information.

Reviews (1)

1 review for ADT Card Reader with Keypad Option 26

  1. Cristen Cordova (store manager)

    This product is easy to mount and is made to withstand any type of weather. I will definitely recommend this product.

Add a review

Your email address will not be published. Required fields are marked *