ADT Doorbell Camera DBC835 Mounting Bracket Description:

The ADT Doorbell Camera DBC835 Mounting Bracket works as replacement a mounting bracket for your ADT Doorbell Version V3.  You may have experienced a power issue with your camera, if this is the case, this bracket solves that issue. However, the original hardware which is Version V2.1 does not support this bracket. Furthermore, if you have the V2.1 and are experiencing this problem, you will need to replace the camera. The only limitation of this bracket is that it only works with analog chimes and not digital. We recommend using this bracket for all analog chime installations as it resolves many problems that we see with the regular bracket. If you would like to purchase the ADT Doorbell camera, click here. See the image below for confirmation that this is the correct mounting bracket with your camera.

Mounting Bracket Installation Guide:

The ADT Doorbell Camera DBC835 Mounting Bracket can only be installed with mechanical doorbell chimes. In this configuration, the doorbell camera will be in always on mode, which brings back the 5 second pre-buffer, connects live view faster, and removes the need for the internal battery to be charged.

1.Choose the mounting bracket that will cover the hole of the legacy doorbell button. The larger bracket works only with gang boxes.

2. Connect the power wires from the existing doorbell to the screw terminals of the bracket.

3. Secure the bracket with screws(No. 1 or No. 2)

4. Attach the doorbell camera to the mounting bracket. Make sure the doorbell camera is firmly fixed and working properly.

Caution: To avoid damaging the rubber seal of the pogo pins, please attach the camera to the mounting bracket flush. Mounting bracket should lay flat against the wall. Over torqueing can warp the bracket and cause it to lose contact with pins.

Please check out our YouTube Channel for more information.