Product Description:

The Hardwired Alarm Contact can be used with any hardwired system to protect an opening like a door, window, or even a gate. It’s also installed fairly easily, and it can be used indoors or outdoors. This device is RoHS compliant, meaning these certifications and compliance standards ensure safety, quality, and environmental responsibility in all devices to avoid electrical fires or other hazards. . Additionally, its maximum switching voltage is AC110/DC100.

But if this isn’t quite what you’re looking for, please take a look at our other hardwired contacts here in our shop.

Product Specifications:

• Contact Size: 2.48″L×.48″W×.51″H (63mm×12.2mm×13mm)
• Standard Magnet Size: 2.48″L×.48″W×.51″H (63mm×12.2mm×13mm)
• Standard Gap: .91″
• Colors: White, Brown, Gray
• Operating temperature:-40°C to +60°C
• Voltage Supply: 100V
• Type: Reed Switch
• Certifications: cULus Listed, CE Certified, RoHS Compliant

Installation instructions:

1. Surface mount switch at top or side (NOT on hinge side) of door or hinged window frame
2. On double hung window, surface mount the switch at top, side or bottom of window frame
3. Surface mount the magnet parallel to the switch. Make sure Gap is not less than 1/4” between switch and magnet
4. Insert leads from alarm circuit under terminals

Please check out our YouTube Channel for more information.