Shop
Stick on Terminal Switch/Magnet Set
$6.00 – $7.00
Stick on Terminal Switch/Magnet Set is a mini surface mount screw terminal wide gap switch and magnet set set with breakoff screw hole mounting tabs.
Description
Product Overview
Stick on Terminal Switch/Magnet Set is the installer’s choice of contact configuration because the contact set is designed to cut installation times and helps to prevent false alarms caused by shifting or warping doors and windows.
FEATURES
- QUICK CONNECT, EASY TO INSTALL
- 3M VHB (Very High Bond) DOUBLE SIDED TAPE
- SCREW TERMINALS
- LOW PROFILE DESIGN
- WIDE GAP – N35 NdFeB RARE EARTH MAGNET
- SNAP-ON COVERS
- BREAKAWAY FLANGE
- LISTED TO UL634 STANDARD
- Quick connect, easy to install
- 3M VHB (Very High Bond) double sided tape
- Low profile design
- Wide Gap- N35 NdFeB Rare earth magnet
- Screw terminals
- Breakaway flange
Listed to UL634 standard
Technical Features
- Contact Resistance 150000 Micro Ohm
- Contact Resistance (Ohm) 0.15
- Magnet Type Permanent Magnet
- Mounting Type Surface Mount
- Recommended Use Door, Window
- Standard Gap 1.11″
- Standard Gap (mm) 28.258
- Termination Style Screw Terminal
INSTALLATION INSTRUCTIONS
This switch and magnet set can be fastened using #4 round head wood screws or pan head sheet metal screws. The switch
and magnet housings feature a break away flange that can be removed if desired for tape mounting only. The installation
instructions refer to the more common mounting method using the supplied 3M VHB tape.
• Pre-fit the switch and magnet in the desired location on the window. When mounting, be sure to allow enough clearance
between the switch and magnet for the snap on covers.
• Clean the mounting surface area for both switch and magnet with alcohol and let dry.
• Remove the liner from the tape on the back of the switch and carefully position the switch on the window frame as close
as possible to the movable part of the window.
• Remove the liner from the tape on the back of the magnet and carefully align the magnet parallel with the switch on the
movable part of the window.
• Apply firm pressure to the switch and magnet housing to ensure proper adhesion to the mounting surface.
• Test alarm system for correct operation.
• Snap the covers on the switch and magnet
Please check out our YouTube Channel for more information.
Maria Mac (store manager) –
Great products arrived on time!