Surface Mini Contact with 3/4 inch gap
Shop
Recessed 3/8″ Mini Stubby Press Fit Switch/Magnet Set
$6.00
The recessed 3/8″ Mini Stubby Press Fit Switch/Magnet Set recessed contact, protects all nonferrous doors and windows
Description
Product Overview
The recessed 3/8″ Mini Stubby Press Fit Switch/Magnet Set recessed contact, protects all nonferrous (e.g. wood, aluminum, and vinyl) doors and windows, in both residential and commercial settings.
The recessed 3/8″ Mini Stubby Press Fit Switch/Magnet Set is the installer’s choice of contact configuration where drill depth is critical and excellent air and side-to-side gap are required to prevent false alarms caused by shifting or warping doors and windows
Main Features
- Encapsulated hermetically sealed contacts
- Ploypropylene housings
- Listed to UL634 standardINSTALLATION INSTRUCTIONS
• Mark location for the switch on the door frame and mark the location for the magnet on the top edge of the door.
• Make sure switch and magnet hole locations are aligned.
• Using a square, transfer the marks on to the top edge of the door and the opposing door frame.
• Using a tape measure or graduations on the square, locate the center of the door edge and place an intersecting line with
the first mark. Drill a 3/8” hole at the location where the marks intersect.
• Repeat the above step to locate the hole position for the switch in the door frame. Drill a 3/8” hole in the door frame.
• Press the magnet into the hole you drilled in the door until flush with top edge of door.
• Connect the switch leads to the alarm system. Caution! Hold wire leads, not the switch housing while cutting and
stripping to prevent damage to switch.
• Insert wire leads into hole followed by the switch and press the switch into the hole until the head is flush with the door
frame
• Test switch for correct operation and make sure gap performance is acceptablePlease check out our YouTube Channel for more information.
Maria Mac –
Great product! I love this shop!