Call: 1-800-871-2119
Shop
Recessed 3/4″ Stubby DPDT Switch for Steel Wood Doors
$ 14.99
The recessed 3/4″ Stubby Switch for Steel Wood Doors wide gap is designed for residential, commercial, and industrial steel and wood door application
Description
The recessed 3/4″ Stubby DPDT Switch for Steel Wood Doors wide gap stubby door contact is designed for residential, commercial, and industrial steel and wood door applications.
The recessed 3/4″ Stubby DPDT Switch for Steel Wood Doors is the installer’s choice of contact configuration because the contact set is designed to cut installation times and helps to prevent false alarms caused by shifting or warping doors.
FEATURES
- SNAP-FIT ON STEEL – NO GLUE REQUIRED
- ENCAPSULATED HERMETICALLY SEALED CONTACTS
- 12″ 22AWG WIRE LEADS
- POLYPROPYLENE HOUSINGS
- WIDE GAP – N35 NdFeB RARE EARTH MAGNET
- LISTED TO UL634 STANDARD
Main Features
- Snap-fit on steel – no glue required
- Encapsulated hermetically sealed contacts
- 12″ 22AWG wire leadsINSTALLATION INSTRUCTIONS
• Mark the location for the switch on the door frame and mark the location for the magnet on the door.
• Make sure switch and magnet hole locations are aligned.
• Drill holes for the switch and magnet using a 3/4” Hole Saw for steel doors or a Forstner bit for wood doors.
• Press the magnet into the hole in the door until seated firmly against the head. Silicone may be used to secure the
magnet in wood doors.
• Connect the switch leads to the alarm circuit conductors. Hold the wire leads (not the switch housing) when cutting and
stripping to prevent damage to the switch.
• Feed the switch conductors into the hole and insert the switch housing pressing firmly until seated. Silicone may be used
to secure the switch in wood doors.
• Test the switch for correct operation and make sure gap performance is acceptable.Please check out our YouTube Channel for more information.
Maria Mac –
Great product!! I am glad I found this shop!