ADT Plunger Switch Leads
Shop
Recessed 3/4″ SPDT Switch/Magnet Set
$24.00
The recessed 3/4″ SPDT Switch/Magnet Set Series is a wide gap door contact designed for residential, commercial, and industrial steel and wood door applications.
Description
Product Overview
The recessed 3/4″ SPDT Switch/Magnet Set is the installer’s choice of contact configuration because the contact set is designed to cut installation times and helps to prevent false alarms caused by shifting or warping doors.
- Encapsulated hermetically sealed contacts
- Ploypropylene housings
- Listed to UL634 standard
- Contact Type Closed Loop, Open Loop
FEATURES
- SNAP FIT ON STEEL – NO GLUE REQUIRED •
- ENCAPSULATED HERMETICALLY SEALED CONTACTS
- 12” 22AWG WIRE LEADS
- POLYPROPYLENE HOUSINGS
- WIDE GAP – N35 NdFeB RARE EARTH MAGNET
- LISTED TO UL634 STANDARD
INSTALLATION INSTRUCTIONS
• Mark the location for the switch on the door frame and mark the location for the magnet on the door.
• Make sure switch and magnet hole locations are aligned.
• Drill holes for the switch and magnet using a 3/4” Hole Saw for steel doors or a Forstner bit for wood doors.
• Press the magnet into the hole in the door until seated firmly against the head. Silicone may be used to secure the
magnet in wood doors.
• Connect the switch leads to the alarm circuit conductors. Hold the wire leads (not the switch housing) when cutting and
stripping to prevent damage to the switch.
• Feed the switch conductors into the hole and insert the switch housing pressing firmly until seated. Silicone may be used
to secure the switch in wood doors.
• Test the switch for correct operation and make sure gap performance is acceptable.Please check out our YouTube Channel for more information.
Maria Mac –
Great product works well!