Shop

Lyric Motion Detector

$120.00

The Lyric Motion Detector is a wireless passive infrared motion sensor. This motion detector will only be active when the system is armed to help significantly extends the battery life. The Lyric Motion Detector is part of the SIX series protocol, Honeywell’s encrypted wireless protocol for secure communication to the Lyric Controller. Once you’ve enrolled it with your Lyric Controller, it won’t work on any other system until you remove it from the original controller. That’s a nice perk of the new protocol.

SKU: 1691 Categories: ,
Description

The Lyric Motion Detector is a wireless passive infrared motion sensor. This motion detector will only be active when the system is armed to help significantly extends the battery life. The Lyric Motion Detector is part of the SIX series protocol, Honeywell’s encrypted wireless protocol for secure communication to the Lyric Controller. Once you’ve enrolled it with your Lyric Controller, it won’t work on any other system until you remove it from the original controller. That’s a nice perk of the new protocol.

Additionally, this motion detector senses changes in ambient temperature across the detection pattern and should not be mounted near/facing sources of air movement or rapid temperature changes.  Avoid heating vents, air conditioners, central air intakes vents, ceiling fans, or large areas of glass with direct exposure to the sun.  After enrolling the device into the system, the motion detector can be put into a walking test mode to help you determine placement of the sensor.

Testing:

You can initiate the walking test mode via the Lyric Controller. Or, prior to the first arming, you can use a flashlight with a strong, narrow beam.  Standing within 4 feet of the motion detector, shine the light straight into the lens of the motion detector for 1 to 2 seconds.  You’ll flash the light for 1 to 2 seconds, 3 to 5 times, then the LED light indicating test mode will flash.  The system will stay in test mode for 10 minutes, during the test the LED on the motion detector will illuminate each time it detects motion.

Then, thoroughly walk through the area, and be sure to turn on any possible sources of movement or temperature changes. This helps determine the correct placement and mounting height for the detector. But after the first arming, you can’t use the flashlight method and test mode will only be available through the Lyric Controller.

Features:
  • Mounting Hardware – Included
  • Transmission Range – 300 ft (92 meters) plus*
  • LED Indicators – Yes
  • Detection Pattern – 40′ x 56′
  • Temperature Sensing Capable – Yes
  • Frequency – 2.4 GHz
  • Encryption – 128-bit AES
  • Battery Life – Five years (typical use)
  • Power Requirements – 3 volt CR123 battery (Qty 1)
  • Tamper Protected – Yes
  • Operating Temperature – 32°F – 122°F/0°C – 50°C
  • Temp. Compensation – Yes
  • Relative Humidity – 5-95%, non-condensing
  • Dimensions – 4.1″ H x 2.3″ W x 1.5″ D/
  • 105mm H x 60.4mm W x 39.3mm D
  • Approval Listings – FCC/IC, ETL Listed to UL 639, cETL Listed to ULC-S306-03
  • Authorized Countries – US/Canada/Latin America
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Lyric Motion Detector”

Your email address will not be published. Required fields are marked *