Product Description:

This Electrified Push Bar Retraction provides an innovative solution for an access control system into the door using a simple switch. It has a fast, quiet, and smooth operation when operating to open, close, or hold the door. The bar retraction has a new design that rid of all drilling or cutting from the previous model. With its easy-to-install feature, It easily hooks onto the back activating bracket and is secured with (2) screws, in a matter of seconds. The only hole you’ll need to drill is for the wire raceway. This Electrified Push Bar Retraction is ideal for high-traffic areas where speed and ease of access are crucial. With its UL listed, this will make sure that this bar retraction is certified to meet the highest safety standards of electrified bar retraction. It has an MM4S smart module for 3 different energy consumption settings.

If you are looking for more access control components to pair with this retraction, Feel free to check out our available products.

Main Features:

• Next Generation MM4S Smart Module
• 5-second electronic adjustment for easy post-installation adjustment
• Auto re-engage if the push pad is pulled from the dogged position
• Low Current Draw
• Up to 300’ wire run with 2-18ga wire
• 8’ cable with Quick Connect for MM4S module
• Built-in REX Switch

Product Specification:

Voltage: 

• Voltage range – 24 to 28 VDC
• System protection – unit shutdown when voltage exceeds 28VDC
• Standard – Average Current Peak: 900MA, Average Current Hold: 215mA
• Low Current – Average Current Peak: 600MA, Average Current Hold: 150mA
• High Torque – Average Current Peak: 2A, Average Current Hold: 250mA
• PTS adjustment – approx. 1/4”

Wire Run: 

• 300’ with 18ga wire

Details: 

• Box: 10.5” x 3.75”: x 2.5”
• Weight: 2 Lbs
• 15 Master Pack
• Weight: 30 lLbs 12.75” x 11.75” x 11”