The Prodatakey Request to Exit Motion Infrared Sensor is specifically designed for request-to-exit applications. It also has qualified motion analysis and is adjustable for a 0.5-64 second time delay. Additionally, you can mount this sensor to a frame header, wall, or ceiling. But keep in mind that you should only use this sensor indoors.

Features of the Prodatakey Request to Exit Motion Infrared Sensor:

• Adjustable 0.5-64 second time delay
• Micro-based signal processing
• High sensitivity
• Available in white or brown enclosure

Installation Instructions:

1. Select a mounting location over the center of the door. The target must walk directly toward the detector. Mount the detector on the ceiling, wall, or door frame.
2. Remove the front cover from the detector.
3. Route the wiring as necessary through the wiring entrance. For surface wiring,use the break out wiring entrance on the front cover(at the same end as the wire entrance).
4. Loosely mount the back cover to the mounting surface using the supplied mounting screws.
5. Aim the detector for the desired coverage.
6. Mount the front cover on the detector.