The ClareOne Wireless PIR Motion Sensor is made to easily fit in a room’s corner or next to a wall or door which can ideally detect motion.  The motion detected is then identified and transmitted to the ClareOne Wireless Home Security Panel. It features Passive Infrared Technology (PIR) that provides more accurate detection of any movements within the area.

The ClareOne Wireless PIR Motion Sensor Sensor requires mounting hardware or double-sided tape which may be installed in practically any place. This device is powered by CR123A batteries.

Main Features:

• Encrypted 433Mhz Technology – The ClareOne PIR Motion Sensor features encrypted technology that prevents alarms from jamming or hacking. It can be affixed to any wall to communicate a faulted zone to the ClareOne Panel. Passive Infrared Technology- Radiant heat detection helps the sensor detect motion more accurately and remain immune to pets up to 45-80lbs.
• Motion Detection – The ClareOne PIR Motion Sensor detects motion up to 90º and is adjustable up to 25′ x 35′.
• Extension Signal – Features a wireless range that has exceeded 2000′ open air (site conditions affect transmission range).
• Tamper Protected Case – features a built-in enclosure tamper.
• Simple Setup – The ClareOne PIR Motion Sensor pairs easily and quickly with the ClareOne Panel.

Specifications:

• Transmitter: 433MHz
• Encrypted: Yes
•  Detection: Length: Default: 32.80 ft (10m); Optional: 19.68 ft (6m); Angle: 90°
• Pet immunity: up to 55 lbs
• Transmitted indications: Tamper and low battery
• Supervisory keep-alive: 60-70 minutes
• PIR function: Sensitivity (2 stops); Pet immunity (2 stops)
• Control Button: Pairing
• Battery Type: CR123A (1300mAh)
• Battery Life: 5 years
• Water Resistant: No
• Operating Temperature: 32° to 122°F (0° to 50°C
•  Operating Humidity: 85% ma
•  Dimensions (W x H x D): 2.16″ × 2.99″ × 1.65″ (55 × 76 × 42 mm)

Please check out our YouTube Channel for more information