Shop

Bosch Outdoor Motion Detector

$262.00

Firstly, The Bosch Outdoor Motion Detector is ideally suited for outdoor use.  In addition, this detector combines passive-infrared (PIR) and microwave detection with advanced signal processing to provide round-the-clock surveillance and reduce false alarms. Furthermore, The detectors process PIR signals with Motion Analyzer II signal processing and microwave signals with Linear Travel Distance (LTD) signal processing. Additionally, this unit can also distinguish between small as well as repetitive movements such as tree branch swaying and the more purposeful movement of an intruder.

SKU: 1373 Category:
Description

Description:

Firstly, The Bosch Outdoor Motion Detector is ideally suited for outdoor use.  In addition, this detector combines passive-infrared (PIR) and microwave detection with advanced signal processing to provide round-the-clock surveillance and reduce false alarms. Furthermore, The detectors process PIR signals with Motion Analyzer II signal processing and microwave signals with Linear Travel Distance (LTD) signal processing. Additionally, this unit can also distinguish between small as well as repetitive movements such as tree branch swaying and the more purposeful movement of an intruder.

Compatible with hardwired panels like Safewatch Pro 3000/Vista 20P, Concord Panel, or DSC Neo Panel.

Key Features of Bosch Outdoor Motion Detector

  • Motion Analyzer II PIR signal processing
  • Linear Travel Distance microwave signal processing
  • Two user-selectable sensitivity levels
  • Timed relay output adjustable from 2 sec to 10 min
  • User-selectable AND/OR and Day/Night Modes
  • Draft and insect immunity

LTD Microwave Signal Processing
This microwave signal processor measures the linear travel distance of a target to make an alarm decision. It eliminates alarms for objects that move but do not travel, such as tree limbs and hanging signs.

Two Sensitivity Levels
The detectors have two user-selectable PIR sensitivity settings: Standard sensitivity is the recommended setting for a minimum of false alarms. The detector tolerates environment extremes on this setting. Intermediate sensitivity is the recommended setting for any location where an intruder is expected to cover only a small portion of the protected area. The detector tolerates normal environments on this setting. This setting identifies intruders more quickly, but may produce more false alarms.

Adjustable Timed Relay Output
In addition to an alarm relay, there is a Form C, unsupervised, timed relay contact that alternates state 1 sec after an alarm and follows a user-selectable timer. The time expires at the set time after the last alarm (it resets on each new alarm).

AND/OR Mode
This DIP-switch setting specifies whether the detector reports alarm situations in the AND mode (when both technologies simultaneously sense an alarm condition) or in the OR mode (when either the PIR or microwave technology senses an alarm state). OR mode provides faster detection in some conditions as the detector activates the alarm relay based on a single technology input. In addition to selecting the DIP-switch to specify OR mode, the jumper must be cut which prevents the unintentional or accidental use of OR mode.

LEDs
The high-efficiency LEDs (one red and one green) use the same technology as traffic lights to make them visible in sunlight. A DIP-switch setting allows the user to disable these LEDs during standard operation to save power.

Draft and Insect Immunity
The sealed optical chamber prevents drafts and insects from affecting the detector

Please check out our YouTube Channel for more information.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Bosch Outdoor Motion Detector”

Your email address will not be published. Required fields are marked *