The Alarm.com Doorbell Mounting Wall Plate is used with the Alarm.com Video Doorbell. Which will be installed between the doorbell camera and the wall. So that blemishes on the wall can be covered up and hidden. This Doorbell Mounting Wall Plate is made to cover up the single gang outlet on the outside of your home, where the doorbell outlet is. If you upgraded your doorbell to the Alarm.com Video Doorbell, or already have the Alarm.com Video Doorbell. And noticed that behind the doorbell that there are scuff marks, screw holes, or missing paint around the doorbell.

Its 5.43″ x 3.43″  size will cover those eyesores that the doorbell can not cover. This wall plate is perfectly designed to cover up those holes or missing paint. Cover those eyesores with this wall plate and give your doorbell a brand new sleek look with the Alarm.com Doorbell Mounting Wall Plate.

Specifications

• Compatible with Alarm.com Video Doorbell
• 5.43″L x 3.43″W

Installation

1. Place the mounting plate against the mounting surface, and then do either of the following:
   1. Thread the mounting screws through the mounting bracket and outer (highest to lowest) holes on the wall plate
   2. Thread the mounting screws through the backplate and the inner holes on the wall plate.
2. To complete the Installation, you should either thread the mounting screws through the mounting bracket and the outer. Going from highest to lowest on the wall plate. Or thread the mounting screws through the backplate and the inner holes on the wall plate.