Shop
Elk Wireless Receiver
$215.00
The Elk Wireless Receiver is an (RF) Receiver and Input Expander for use with the Elk Control Board. The receiver connects to the four (4) wire data (keypad) bus of the control and integrates in much the same way as a hardware zone expander. While a single Wireless Transceiver can also handle up to 144 wireless zones (e.g. transmitter sensors or points).
Furthermore, the receiver is a dual (2) antenna, phase diversity design capable of long-range wireless coverage. Plus, It is compatible with ELK’s 319 Series Wireless Sensors, as well as other 319.5MHz sensors (Interlogix format).
Description
Elk Wireless Receiver Description:
The Elk Wireless Receiver is an (RF) Receiver and Input Expander for use with the Elk Control Board. The receiver connects to the four (4) wire data (keypad) bus of the control and integrates in much the same way as a hardware zone expander. While a single Wireless Transceiver can also handle up to 144 wireless zones (e.g. transmitter sensors or points).
Furthermore, the receiver is a dual (2) antenna, phase diversity design capable of long-range wireless coverage. Plus, It is compatible with ELK’s 319 Series Wireless Sensors, as well as other 319.5MHz sensors (Interlogix format).
It is easy to operate and provides efficient results.
Features:
- Adds up to 144 individual wireless zones (sensors/points)
- Also Operates as a result of the 4 wire RS485 Data Bus
- Additional Receivers (up to 9) may also be connected to a single M1 or Control for redundancy or greater coverage
- Flash Memory for Updating of operating Firmware
Specifications:
- Sensitivity: >105 dBm
- Operating Temperature: 0 to +120 degrees F
- Operating Voltage: 12 Volts D.C.
- Current Draw: 70mA
• While Range consists of 300 to 500 ft. line of sight
Includes:
• Plastic Housing
• 2 Antenna
• 4 #6 Plastic Anchors
• As well as 4 # 6 Pan Head Sheet Metal Screws
• Additionally includes Instructions
Cristen Cordova –
It works well with great results. Very useful.