Z-Wave Interface Module

The Z-Wave Interface Module helps make almost any device speak Z-Wave. This module is an interface/bridge module that is capable of converting a digital or analog voltage input into a Z-Wave frequency output. This module comes with a plastic enclosure; however, it is for indoor use only. You can also program it to periodically set off, allowing for a variety of use as well.

Product Features

• Connect one wired devices to signal input and make them wireless.
• Connect them functionally to your home security panel OR to your z-wave home automation network
• Also connect high or low up to 16V digital signals
• Connect pulse reading devices
• Connect up to 16V analog signals
• Indoor use only

Specifications

• Power: 9-16 V DC from a power supply @~ 300mA capability
• Frequency Range: 908.4MHz (US); 868.4MHz (EU)
• Distance Range: Max 100ft line of sight in unobstructed environment
• Enclosure Size (L x W x D): 3 3/8″ (85mm) x 2 1/2″ (64mm) x 1 1/4″ (30mm)
• Weight: 4 oz (100 gram)
• Operating Temperature: -10⁰C (14F) to +70⁰C (158F)
• Input Signal 1 (SIG1): Digital or Analog Input 0 to 16V DC or 16 Hz Max for pulse counting (minimum 32 ms high or low time). The trigger levels and hysteresis can be set via the Configuration Command Class for the two endpoints.
• Input Signal Impedance Input impedance for SIG1 is Z=66 ohm at 10KHz. This impedance is = 66 ohm = 34 ohm + j 540uH.

For more information on security, you can visit our YouTube channel here