This Unsupervised Water Sensor for Waterbug is for use with the Waterbug Hardwired Flood Detector. It is surface mounted to a floor and triggers when water is detected on at least two of the four feet.

This sensor is ideal for basement sump pumps, drain and storage areas, computer rooms, document storage areas, warehouses, and sprinkler systems. The sensor then activates when a conductive bridge is formed between two contacts. So it will let you know of flooding dangers before it becomes a big problem.

Additionally, make sure you use it in conjunction with an alarm panel, bell, wireless transmitter, etc. It can connect as many as 6 sensor probes up to 100′ (30.48 m) away from the console for wide area protection.

Unsupervised Water Sensor for Waterbug Features:

• Hardwire powered console unit
• Includes one standard unsupervised surface sensor
• Console accepts standard unsupervised under carpet sensors
• Console accepts up to 6 total sensors

Specifications:

• Power Requirement
• 8 to 28 VDC @ 35mA
• 8 to 28 VAC @ 100 mA
• Sensitivity: Will not alarm due to high humidity or condensation.
• Operating Temp for Console and Probe: 32 to 130°F (0 to 54 °C)
• Max Distance: 1-2 probes; 200’ (61 m), 3-6 probes; 100’ (30.5 m) per probe
• Max Probes per Console: 6
• Probe Dimensions (surface) [W-S-U]: 2 x 3 x .88” (5.1 x 7.6 x 2.2 cm)
• Probe Dimensions (under carpet) [W-UC-U]: 2 x 3 x .18” (5.1 x 7.6 x .5 cm)
• Console Dimensions: 4.1 x 2.36 x 1.18” (10 x 6 x 3 cm) with flanges
• Weight: 2.4 oz (0.07 kg)

Please check out our YouTube Channel for more information.