Thin Door/Window Encrypted Sensor Description:

Firstly, the Thin Door/Window Encrypted Sensor works best for use on doors, windows, and other objects that open and close. It also communicates with the control panel using the 345 MHz frequency. Furthermore, when the magnet (which is mounted near the sensor) moves away from or closer to the door contact’s sensor, signals are transmitted to the control panel.

The door contact also has an external input that also accepts connections from normally-closed (NC) dry contact devices. Additionally equipped with a cover tamper for added protection. But if this isn’t what you’re looking for, please look at our other 2GIG products.

Thin Door/Window Encrypted Sensor Features:

• For narrow applications, the sensor is only 3/4″ wide
• Fully supervised
• Rare earth magnet
• Supports internal and external contacts
• Also used for 2 zones of protection
• Lithium battery
• ETL listed

Product Specifications:

• Wireless Signal Range: 350 ft., open-air, while with 2GIG Wireless Alarm Control Panel
• Code Outputs: Alarm; Alarm Restore; External Alarm; External Restore; Tamper; Tamper Restore; Supervisory; Low Battery
• Frequency: 345.000 MHz (crystal controlled)
• Frequency Tolerance: ± 15 kHz
• Bandwidth: 24kHz
• Modulation Type: Amplitude Shift Keying-On/Off Keying
• Unique ID Codes: While including over one (1) million different code combinations
• Supervisory Interval: 70 minutes
• Peak Field Strength: Typical 36,000 uV/m at 3m
• Reed Switch Magnetic Sensitivity: 10 to 20 amp turns
• Reed Sensitivity: 0.625 in. (1.59 cm) minimum gap, 0.85 in. (2.16 cm) typical
• Magnet Type: Rare earth
• Magnet Dimensions (LxWxH): 1.3 x 0.435 x 0.312 in. (3.3 x 1.1 x 0.79 cm)
• Sensor Dimensions (LxWxH): 2.59 X 1.03 X 0.49 in. (6.58 x 2.62 x 1.24 cm)
• Weight (including battery & magnet): 1.1 oz. (31.2 g)
• Operating Temperature: 32° to 120°F (0° to 49°C)
• Relative Humidity: 5-95% Non-Condensing
• Lastly, Battery (included): Two (2) Panasonic CR2032, or equivalent Lithium batteries