Call: 1-800-871-2119
Shop
Surface Mount Terminal Industrial Bar Switch/Magnet Set
Price range: $ 20.00 through $ 23.00
Surface Mount Terminal Industrial Bar Switch/Magnet Set is a 4 Inch Industrial Surface Mount Screw Terminal Contacts Protects Steel Doors In Commercial Settings.
Description
Product Overview
Surface Mount Terminal Industrial Bar Switch/Magnet Set is a 4 Inch Industrial Surface Mount Screw Terminal Contacts Protects Steel Doors In Commercial Settings.
Surface Mount Terminal Industrial Bar Switch/Magnet SetIs The Installer’s Choice Of Contact Configuration Where Extra Wide Air And Side-to-side Gap Are Required To Prevent False Alarms Caused By Shifting Or Warping Doors And Windows. The 400T Is Offer Extreme Flexibility For Installation With Four Possible Wire Directions, Including The Bottom.
FEATURES
- ENCAPSULATED HERMETICALLY SEALED CONTACTS
- ABS HOUSING
- EXTRA WIDE GAP – N35 NdFeB RARE EARTH MAGNET
- SPACER FOR STEEL DOOR INSTALLS
- SCREW TERMINALS
- LISTED TO UL634 STANDARD
Main Features
- Encapsulated hermetically sealed contacts
- Extra wide gap – N35 NdFeB rare earth magnet
- Screw terminals
- ABS Housing
- Spacer for steel door installs
- Listed to UL634 standardINSTALLATION INSTRUCTIONS
Note: High Security model – Dots on switch and magnet must be aligned for correct operation.
• Position the switch on the door/window frame in the desired location as close to the movable part of the door /window as possible.
• Mark the switch mounting screw locations and drill the mounting screw holes using a drill adequately sized for #6 self-tapping screws.
• Connect the alarm circuit leads to the terminals on the switch and test the system for correct operation.
• Install screws and tighten to mount the switch on the door/window frame.
• Position the magnet on the movable part of the door/window, align the magnet with the switch as close as possible. For steel door or
window applications, use the enclosed spacer under the magnet.
• Mark the magnet mounting screw locations and drill the mounting screw holes using a drill adequately sized for #6 Self-tapping screws.
• Install screws and tighten to mount the magnet on the door/window.Please check out our YouTube Channel for more information.
Maria Mac –
Great product Great shop!!