REPLACEMENT COMMERCIAL MAGNET DESCRIPTION:

The Replacement Commercial Magnet works as a replacement rare earth magnet for your doors or windows in your commercial building. If you are using a wireless transmitter with your magnet, you need to make sure you install the magnet no further than ½” to 1″ from the senor when the door/window is closed this may need to be closer to further away depending on the door/window contact you have.  If the magnet is further than ½” to 1″ from the transmitter, it will falsely state that the door/window is open. Proper alignment between the magnet and the sensor is essential to the proper function of the sensor. all you will need to install this is two screws just set it near enough to the door/window sensor and drill it into the wall. This is easy and simple to set up.

If you wanted to keep your window open while it is armed you could install a second magnet 3-6 inches in. So that it would be lined up with the sensor even while the window is open. That way you could arm your system without bypassing a window sensor.

If you are looking for other commercial hardwire contacts you can go here