Call: 1-800-871-2119
Shop
Recessed 3/8″ Stubby Terminal Press Fit Switch/Magnet Set
$ 6.00
The recessed 3/8″ Stubby Terminal Press Fit Switch/Magnet Set is a recessed contact with terminals and protects all nonferrous doors and windows.
Description
Product Overview
The recessed 3/8″ Stubby Terminal Press Fit Switch/Magnet Set is a recessed contact with terminals, and protects all nonferrous (e.g. wood, aluminum, and vinyl) doors and windows, in both residential and commercial settings. The recessed 3/8″ Stubby Terminal Press Fit Switch/Magnet Set is the installer’s choice of contact configuration where drill depth is critical and excellent air and side-to-side gaps are required to prevent false alarms caused by shifting or warping doors and windows.
Main Features
- Encapsulated hermetically sealed contacts
- Ploypropylene housings
- Listed to UL634 standard|INSTALLATION INSTRUCTIONS
• Mark the location for the switch on the door frame and mark the location for the magnet on the top edge of the door.
• Make sure switch and magnet hole locations are aligned.
• Using a square, transfer the marks onto the top edge of the door and the opposing door frame.
• Using a tape measure or graduations on the square, locate the center of the door edge and place an intersecting line with
the first mark. Drill a 3/8” hole at the location where the marks intersect.
• Repeat the above step to locate the hole position for the switch in the door frame. Drill a 3/8” hole in the door frame.
• Connect wire leads to the screw terminal.
• Press the magnet into the hole you drilled in the door until flush with the top edge of the door.
• Insert wire leads into the hole followed by the switch and press the switch into the hole until the head is flush with the door
frame
• Test the switch for correct operation and make sure gap performance is acceptable.Please check out our YouTube Channel for more information.
Maria Mac –
Great product! arrived on time! Glad to find this shop