Call: 1-800-871-2119
Shop
Recessed 3/4″ Stubby Switch/Shark Magnet Set
The recessed 3/4″ Stubby Switch/Shark Magnet Set is a stubby door contact coupled with the patented SHARKTM magnet. The set is designed for residential, commercial, and industrial steel and wood door applications.
Description
Product Overview
The recessed 3/4″ Stubby Switch/Shark Magnet Set is a stubby door contact coupled with the patented SHARKTM magnet. The set is designed for residential, commercial, and industrial steel and wood door applications.
The recessed 3/4″ Stubby Switch/Shark Magnet Set is the installer’s choice of contact configuration because the contact set is designed to cut installation times .. just a pinch of the springs installs the SHARKTM magnet permanently and the powerful rare earth magnet helps to prevent false alarms caused by shifting or warping doors.
FEATURES
- SNAP FIT ON STEEL – NO GLUE REQUIRED
- ENCAPSULATED HERMETICALLY SEALED CONTACTS
- TIME SAVING INSTALLATION
- NO SILICONE REQUIRED, NO MESS
- 12″ 22AWG WIRE LEADS
- POLYPROPYLENE SWITCH HOUSING
- WIDE GAP – N35 NdFeB RARE EARTH MAGNET
- LISTED TO UL634 STANDARD
Main Features
- Snap fit on steel – no glue required
- Encapsulated hermetically sealed contacts
Time-saving installation
Technical Information
- Contact Configuration N.O.
- Contact Resistance 150000 Micro Ohm
- Contact Resistance (Ohm) 0.15
- Lead Gauge 0.87″
- Lead Gauge (mm) 22
- Lead Length 36″
- Lead Length (mm) 914.
- Magnet Type Permanent Magnet
- Mounting Type Recessed Mount
- Recommended Use Door
- Standard Gap 1.25″
- Standard Gap (mm) 31.75
- Termination Style Wire LeadsINSTALLATION INSTRUCTIONS• Mark location for the switch on the door frame.
• Drill a hole for the switch using a 3/4” Hole Saw for steel doors or a Forstner bit for wood doors.
• Connect the switch leads to the alarm circuit conductors. Hold the wire leads (not the switch housing) when cutting and
stripping to prevent damage to the switch.
• Feed the switch conductors into the hole and insert the switch housing pressing firmly until seated. Silicone may be used
to secure the switch in wood doors.
• Test switch for correct operation and make sure gap performance is acceptable.
• Place a mark on the top edge of the door aligned with the center of the switch.
• Press the springs inward on the sides of magnet.
• Insert the magnet in u-channel in the top of the door centered with the alignment mark.
• Release the springs to secure the magnet and complete the installation.
Please check out our YouTube Channel for more information.
Maria Mac –
Great Product this shop is amazing!