Shop
Recessed 1″ Wide Gap Standard Door Contact Set
$36.00 – $42.00
Recessed 1″ Wide Gap Standard Door Contact Set Series is designed for residential, commercial, and industrial steel and wood door applications.
Description
Product Overview
Main Features
- Snap fit on Steel- no Glue required
- 12″ 22AWG wire leads
- Wide Gap- N35 NdFeB Rare earth magnet
- Encapsulated hermetically sealed contacts
- Polypropylene housings
- Listed to UL634 Standard
-
Physical Characteristics
Recessed 1″ Wide Gap Standard Door Contact Set
Application/Usage Commercial, Industrial, Residential, Steel, Wood
Color whiteMagnet Material NeodymiumProduct Material PolypropyleneINSTALLATION INSTRUCTIONS for Recessed 1″ Wide Gap Standard Door Contact Set
• Mark the location for the switch on the door frame and mark the location for the magnet on the door.
• Make sure switch and magnet hole locations are aligned.
• Drill holes for the switch and magnet using a 3/4” Hole Saw for steel doors or a Forstner bit for wood doors.
• Press the magnet into the hole in the door until seated firmly against the head. Silicone may be used to secure the
magnet in wood doors.
• Connect the switch leads to the alarm circuit conductors. Hold the wire leads (not the switch housing) when cutting and
stripping to prevent damage to the switch.
• Feed the switch conductors into the hole and insert the switch housing pressing firmly until seated. Silicone may be used
to secure the switch in wood doors.
• Test the switch for correct operation and make sure gap performance is acceptable.Please check out our YouTube Channel for more information.
Maria Mac –
Great product! Correct order!