Call: 1-800-871-2119
Shop
Recessed 1″ Switch/Magnet Set
Price range: $ 11.00 through $ 14.00
The recessed 1″ Switch/Magnet Set is a wide gap stubby door contact designed for residential, commercial, and industrial steel and wood door applications.
Description
The recessed 1″ Switch/Magnet Set is a wide gap stubby door contact designed for residential, commercial, and industrial steel and wood door applications.
The recessed 1″ Switch/Magnet Set is a choice of contact configuration because the contact set is designed to cut installation times and helps to prevent false alarms caused by shifting or warping doors.
The recessed 1″ Switch/Magnet Set is designed for installation in every type of hinged door including wood doors.
FEATURES
- SNAP FIT ON STEEL – NO GLUE REQUIRED
- ENCAPSULATED HERMETICALLY SEALED CONTACTS
- 12″ 22AWG WIRE LEADS
- POLYPROPYLENE HOUSINGS
- WIDE GAP – N35 NdFeB RARE EARTH MAGNET
- LISTED TO UL634 STANDARD
Main Features
- Encapsulated hermetically sealed contacts
- Ploypropylene housings
- Listed to UL634 standardINSTALLATION INSTRUCTIONS
• Mark the location for the switch on the door frame and mark the location for the magnet on the door.
• Make sure switch and magnet hole locations are aligned.
• Drill holes for the switch and magnet using a 1” Hole Saw for steel doors or a Forstner bit for wood doors.
• Press the magnet into the hole in the door until seated firmly against the head. Silicone may be used to secure the
magnet in wood doors.
• Connect the switch leads to the alarm circuit conductors. Hold the wire leads (not the switch housing) when cutting and
stripping to prevent damage to the switch.
• Feed the switch conductors into the hole and insert the switch housing pressing firmly until seated. Silicone may be used
to secure the switch in wood doors.
• Test the switch for correct operation and make sure gap performance is acceptable.Please check out our YouTube Channel for more information.
Maria Mac –
The correct product arrived! Great shop!