• For residential and commercial applications
• Designed to cut installation times
• Helps to prevent false alarms caused by shifting or warping doors

FEATURES

• SNAP FIT ON STEEL – NO GLUE REQUIRED
• ENCAPSULATED HERMETICALLY SEALED CONTACTS
• 12” 22AWG WIRE LEADS
• POLYPROPYLENE HOUSINGS
• WIDE GAP – N35 NdFeB RARE EARTH MAGNET
• LISTED TO UL634 STANDARD

INSTALLATION INSTRUCTIONS
• Mark the location for the switch on the door frame and mark the location for the magnet on the door.
• Make sure switch and magnet hole locations are aligned.
• Drill holes for the switch and magnet using a 3/4” Hole Saw for steel doors or a Forstner bit for wood doors.
• Press the magnet into the hole in the door until seated firmly against the head. Silicone may be used to secure the
magnet in wood doors.
• Connect the switch leads to the alarm circuit conductors. Hold the wire leads (not the switch housing) when cutting and
stripping to prevent damage to the switch.
• Feed the switch conductors into the hole and insert the switch housing pressing firmly until seated. Silicone may be used
to secure the switch in wood doors.
• Test the switch for correct operation and make sure gap performance is acceptable.

Please check out our YouTube Channel for more information.