Shop
Outdoor EM Card Reader
$80.00 – $90.00
This product is currently Out of Stock. For replacement, check out this Alarm.com Access Control Reader.
The Outdoor EM Card Reader is a kind of high-performance product. It communicates with access controller as a result of Wiegand protocol. As to the physical appearance, the PC+ABS material makes water proof and dust proof possible in poor environment. Additionally use the EM Keyfob for faster access, available here.
Description
Outdoor EM Card Reader Description:
The Outdoor EM Card Reader is a kind of high-performance product. It communicates with access controller as a result of Wiegand protocol. As to the physical appearance, the PC+ABS material makes water proof and dust proof possible in poor environment. Additionally use the EM Keyfob for faster access, available here.
Key Features:
- Meets the standard of ISO 14443-A and the card reading frequency is 13.56MHz. The number and content of EM card can be read;
- Watchdog design for repairing itself in case that exception occurs, to ensure the long service life of the reader;
- Built-in buzzer for identifying the reading status.
- 8-bit processor
- 13.56Mhz Reading Frequency
- Radio Frequency Standard ISO 14443-A
- Beeper
- Keypad with 12 Keys (0-9, *, #)
- Power Indicator, Status Indicator
- ~4”F – 149”F (20”C – 65”C)
- 10% to 90% (Non-Condensing)
- IP65
- 4.56″ x 1.7″ x 0.67″ (115.9mm x 43.3mm x 17mm)
- Wall mounting with screws. Gang Box is not supported
- Available with or without keypad.
Sound Prompt Description
One beep:
- Swiping card prompt
- Pressing keys prompt
- Prompt for too long card No. input by pressing keys.
- Time out prompt for pressing keys or swiping card.
- For Card + Password authentication: prompt for entering the password after swiping the card.
Two rapid beeps
- The operation of pressing keys or swiping card is valid.
Three slow beeps
- The operation of pressing keys or swiping card is invalid.
Rapidly continuous beeps
- Prompt for tamper-proof alarm.
- Prompt for buzzer alarm.
Slowly continuous beeps
- The card reader is unencrypted.
LED Indicator Status Description:
- Green (blink for 1 time), and red (blink for 3 times): The card reader is power on.
- Green and slow blinking: For Card + Password authentication: prompt for entering the password after swiping the card.
- Solid green for 3s: The operation of pressing keys or swiping card is valid.
- Solid red: Card reader is working normally.
- Red and blink for 3 times: The operation of pressing keys or swiping card is invalid.
Please check out our YouTube Channel for more information.
Additional Information
Style |
---|
Cristen Cordova –
I bought one and its very convenient. It is very efficient and reliable. I would definitely recommend this to my friends.