Call: 1-800-871-2119
Shop
Man Door Surface Mount Aluminum/Steel Door Switch Universal Flip Mount
$ 40.00
The man Door Surface Mount Aluminum/Steel Door Switch Universal Flip Mount is a unique flip option that allows the switch to be mounted with the cable in either direction, without loss of gap.
Description
Product Overview
The man Door Surface Mount Aluminum/Steel Door Switch is perfect for man doors. The unique flip option allows the switch to be mounted with the cable in either direction, without loss of gap.
The man Door Surface Mount Aluminum/Steel Door Switch combines the installers’ choice of contact configuration with an N35 NdFeB magnet for maximum gap performance.
NO DEAD SPOT™ technology, in the N505AU closed loop versions, prevent false alarms caused by door misalignment.
FEATURES
- NO DEAD SPOT™ TECHNOLOGY
- UNIVERSAL MOUNT
- EXTRA WIDE GAP – N35 NdFeB RARE EARTH MAGNET
- 36″ 22AWG WIRE LEADS
- 24″ ARMORED CABLE LEAD PROTECTION
- EXTRUDED ANODIZED (TYPE II) ALUMINUM
- FAST AND EASY INSTALLATION
LISTED TO UL634 STANDARD
- Contact Configuration N.O.
- Contact Resistance150000 Micro Ohm
- Contact Resistance (Ohm) 0.15
- Lead Gauge 0.87″
- Lead Gauge (mm) 22
- Lead Length 36″
- Lead Length (mm) 914.4
- Magnet Type Permanent Magnet
- Mounting Type Surface Mount
- Recommended Use Door
- Standard Gap 2.75″
- Standard Gap (mm) 69.85
- Termination Style Wire Leads
Main Features
- Fast and easy installation
- Universal mount
- 24″ Armored cable lead protectionINSTALLATION INSTRUCTIONSNOTE: For N505AU/STHS – red dots on the switch and magnet must be aligned for correct operation.
• Position the switch on the door frame and the magnet on the door in the desired location.
• Place one of the enclosed spacers under the switch and one spacer under the magnet and align the switch and magnet
housings as close as possible to the door with ¼” gap between the housings.
• Mark the mounting hole locations and drill mounting holes using a drill bit adequately sized for a #6 self-tapping screw.
• Place the spacer under the switch and attach it to the door frame using two #6 Self-Tapping screws.
• Place the spacer under the Magnet and attach it to the door using two #6 Self-Tapping screws.
• Connect an ohm meter to the switch leads and open and close the door to test the switch for correct operation.
• Connect the switch leads to the alarm systemPlease check out our YouTube Channel for more information
Maria Mac –
Great Product great Job!