Shop
Man Door Surface Mount Aluminum/Steel Door DPDT Switch
$60.00
Man Door Surface Mount Aluminum/Steel Door DPDT Switch is a unique flip option that allows the switch to be mounted with the cable in either direction, without loss of gap.
Description
Product Overview
Man Door Surface Mount Aluminum/Steel Door DPDT Switch combines the installers’ choice of contact configuration with an N35 NdFeB magnet for maximum gap performance.
FEATURES
- NO DEAD SPOT™ TECHNOLOGY
- UNIVERSAL MOUNT
- EXTRA WIDE GAP – N35 NdFeB RARE EARTH MAGNET
- 36″ 22AWG WIRE LEADS
- 24″ ARMORED CABLE LEAD PROTECTION
- EXTRUDED ANODIZED (TYPE II) ALUMINUM
- FAST AND EASY INSTALLATION
- LISTED TO UL634 STANDARD
Main Features
- Fast and easy installation
- Universal mount
- 24″ Armored cable lead protection
Technical Information
- Contact Configuration PDT
- Contact Resistance 100000 Micro Ohm
- Contact Resistance (Ohm) 0.1
- Lead Gauge 0.87″
- Lead Gauge (mm) 22
- Lead Length 36″
- Lead Length (mm) 914.4
- Magnet Type Permanent Magnet
- Mounting Type Surface Mount
- Recommended Use Door
- Standard Gap 2.5″
- Standard Gap (mm) 63.5
- Termination Style Wire LeadsINSTALLATION INSTRUCTIONS
• Position the switch on the door frame and the magnet on the door in the desired location.
• Place one of the enclosed spacers under the switch and one spacer under the magnet and align the switch and magnet
housings as close as possible to the door with ¼” gap between the housings.
• Mark the mounting hole locations and drill mounting holes using a drill bit adequately sized for a #6 self-tapping screw.
• Place the spacer under the switch and attach to the door frame using two #6 Self-Tapping screws.
• Place the spacer under the Magnet and attach to the door using two #6 Self-Tapping screws.
• Connect an ohm meter to the switch leads and open and close the door to test switch for correct operation.
• Connect the switch leads to the alarm systemPlease check out our YouTube Channel for more information
Maria Mac (store manager) –
Great product!! Delivered fast