Description:

The GE Interlogix Compatible Micro Door Window Sensor is fully compatible with GE Interlogix alarm systems, but it also offers unique features not found from the original brand. Also, this sensor is tiny at only 1.8 x 0.77 x 0.39 inches, making it one of the smallest sensors available. Furthermore, it transmits at the full allowed power to ensure great range as well as coverage.

While even at this compact size, a set of inputs inside the case are available to connect an external magnetic sensor or another normally closed contact, so you can get creative. When this external input is used, it also overrides the internal reed switch and magnet so only one or the other works as well. Additionally, it’s fully compatible with GE Interlogix panels

Compatible With GE Interlogix panels as well as Qolsys products.

GE Interlogix Compatible Micro Door Window Sensor Features:

• Tiny size, only 1.8 x 0.77 x .39 inches
• Also easy to enroll without removing the cover
• 1 Inch magnet gap on internal reed switch/magnet
• Cover tamper
• External contact input (overrides internal reed switch function making reed inoperable)
• 6+ year battery life (battery additionally included)

Key Instructions

• Battery “+” faces up.
• Enrolling:
  
• Place control panel in Learn Sensor Mode
• Open cover to tamper device, or
• Tamper enrollment signal- sent by touching a magnet to the sensor 5 times within 5 seconds

Operation

• Magnetic and hardwire zone
• Alarm, when
  -magnet is pulled away from reed switch or
  -hardwire changes to alarm.
• Tamper, when the cover is opened.
• Supervisors, every hour.

Specifications

• Magnet trip distance: 1-inch nominal
• Mounting fastener: 3M VHB (Very High Bond) Tape
• Replacement Battery: included
• Temperature Range: 0F to 120F
• Housing dimensions: 1.8 x .77 x .39 inches